LCD Type MCU
OR A,x
Description
Operation
Affected flag(s)
ORM A,[m]
Description
Operation
Affected flag(s)
RET
Description
Operation
Affected flag(s)
RET A,x
Description
Operation
Affected flag(s)
RETI
Description
Logical OR immediate data to ACC
Data in the Accumulator and the specified immediate data perform a bitwise logical OR op-
eration. The result is stored in the Accumulator.
ACC
¬
ACC
²OR²
x
Z
Logical OR ACC to Data Memory
Data in the specified Data Memory and the Accumulator perform a bitwise logical OR oper-
ation. The result is stored in the Data Memory.
[m]
¬
ACC
²OR²
[m]
Z
Return from subroutine
The Program Counter is restored from the stack. Program execution continues at the
restored address.
Program Counter
¬
Stack
None
Return from subroutine and load immediate data to ACC
The Program Counter is restored from the stack and the Accumulator loaded with the
specified immediate data. Program execution continues at the restored address.
Program Counter
¬
Stack
ACC
¬
x
None
Return from interrupt
The Program Counter is restored from the stack and the interrupts are re-enabled by set-
ting the EMI bit. EMI is the enable master (global) interrupt bit (bit 0; register INTC). If an in-
terrupt was pending when the RETI instruction is executed, the pending Interrupt routine
will be processed before returning to the main program.
Program Counter
¬
Stack
EMI
¬
1
None
Rotate Data Memory left
The contents of the specified Data Memory are rotated left by 1 bit with bit 7 rotated into bit
0.
[m].(i+1)
¬
[m].i; (i = 0~6)
[m].0
¬
[m].7
None
Operation
Affected flag(s)
RL [m]
Description
Operation
Affected flag(s)
130
Home Index Bookmark Pages Text
Previous Next
Pages: Home Index