MCU Programming Tools
OTP/Flash Programmer
Although most of the HT-ICE hardware emulators now come equipped with an integrated programmer, Holtek also supplies a
range of additional tools for device programming. These programmers can be used to program OTP or Flash type devices during
product development or for low to medium volume production purposes. Most of these programmers can operate by connecting
to a PC or to operate in a stand alone mode. More information on the relevant programmers can be found within the program-
mer¢s Users Guide. Note that if the device package type to be programmed does not match the supplied Textool socket, extra
Adapter Cards are available to accommodate various device package types.
Various kinds of OTP/Flash programmers exist, of which are included a partial-lock programmer and two-chips-in-one program-
mer, which support the MCU with partial lock function and two chips in one package respectively. Also, a Flash programmer pro-
vides the Flash devices programming functions. The detailed information is contained within HT-MTPWriter User¢s Guide.
OTP/Flash
Programmer
Product Name
Product Code
Product Contents
HT-Writer (with an adapter card CADPDIP40A), CD, Power Adapter, RS-232 Cable
The HT-Writer supports most Holtek OTP MCU devices with the exception of the following:
HT48R01, HT48R02, HT48R03, HT46R01, HT46R02, HT46R03, HT56R64, HT56R678, HT45R0S, HT45R0MA, HT45RM03A,
HT45R11, HT45R0Y, which are supported by the Holtek MSR Writer.
The following devices are also not supported by the HT-Writer but are supported by the Holtek VMR writer:
HT36Rx, HT86Rx, HT83Rx, HT46RU26, HT46RU67, HT46RU68
HT-2Cwriter (with an adapter card CADPDIP40B), CD, Power Adapter, RS-232 Cable
HT-PLwriter (with an adapter card CADPDIP40A), CD, Power Adapter, RS-232 Cable
Holtek M1-writer (with CADPDIP40A), CD, Power Adaptor, RS-232 Cable, EIC-101
(Special Note: Supports MTP ISP Programming On-line and Off-line)
Holtek VMR-writer, CD, Power Adaptor, USB Cable
Holtek MCU writer for HT36Rx, HT86Rx, HT83Rx, HT46RU26, HT46RU67, HT46RU68
Holtek PTS-writer, CD, Power Adaptor, USB Cable
Holtek MSR-writer, CD, Power Adaptor, RS-232 Cable
Holtek MCU writer for HT48R01, HT48R02, HT48R03, HT46R01, HT46R02, HT46R03, HT56R64, HT56R678, HT45RM03A
EIC-100, USB Cable
HT-Writer
COTPWRITER00A
HT-2Cwriter (2-chip-in-one)
HT-PLWriter (Partial Lock)
Holtek M1 Writer
Holtek VMR Writer
Holtek PTS writer
Holtek MSR Writer
Holtek MTP ISP cable
COTPEEPROM005A
COTPPLOCK0005A
EW-M1 V1.0
EW-VMR
EW-PTS V1.0
EW-MSR V1.0
EIC-100
Product Application Combination
Product Application Combination
S/W
HT-writer
EverPro M1000 V1.17
EW-MSR
EW-M1
EverPro M1001 V1.05
EverPro K1000 V1.0
EverPro S1000 V1.20
EW-VMR
On-board writer
EIC-101
Starter Kit
H/W
Support existing OTP
Support RC calibration (HT48R01, HT48R02, HT48R03, HT46R01, HT46R02, HT46R03)
Support HT48F06E, HT48F10E, HT48F30E, HT48F50E, HT48F70E
Support HT36R & HT86R OTP
M1001 is the transition product, future will be able by M1000 the V1.10 substitution
Support existing OTP, MTP, but not support RC Calibration, included in IDE3000 S/W
Penetrates PC USB port to make In-system programming
Starter Kit
Description
Accessories and Learning Kits
A USB interface cable is available to allow the HT-ICE emulators to interface to the PC USB port rather than the standard printer
port. Additionally a prototype board is available for the HT46 and HT48 R/C/F series of devices. A Starter Kit and Learner Kit is
also available which can be used in place of the HT-ICE for product learning and application development purposes.
Accessories and Learning Kits
Product Name
EIC-100
EP-100
Flash/MTP Learning Kits
USB ICE Cable
Product Code
EIC-100 V1.0
EP-100 V1.0
ELK-400 V1.0
CUSBICECABLE4A
Flash USB interfaced ISP cable
Prototype board for HT46 and HT48 R/C/F series
ESK-100 (new Flash/MTP starter kit), EIC-100, EP-100, USB cable
HT-ICE printer port to USB converter cable
Product Contents
http://www.holtek.com.tw/pdf/guide.pdf
30
March 31, 2008