Automotive
Quarter 4, 2007
SG187Q42007 Rev 29

FREESCALE SEMICONDUCTOR ANALOG AND MIXED SIGNAL PRODUCTS The product categories range from Power Actuation and Network Transceivers to Benefits—Freescale Semiconductor SMARTMOS technology brings a wide range of Signal Conditioning and Embedded MCU + Power. Power Actuation covers a broad benefits to today’s designs, including component reductions, power flexibility, range of load control and drivers, including motor control. durability, efficiency, precision, high-performance analog, and robustness. SMARTMOS™—Freescale Semiconductor SMARTMOS technology allows Packaging - Freescale devices may be offered in EPP and RoHS compliant designers to interface high-precision components with the harsh automotive packages; view the external web for specifics. environment. Cost-Effective—Ideally suited for rugged automotive applications, SMARTMOS For additional information, visit: solutions offer a cost-effective blend of analog, digital, and robust power silicon that enables integrated, mixed-signal, power control ICs. Documentation, Tool, and Product Libraries www.freescale.com Functionality—SMARTMOS solutions implement traditional analog functions with www.freescale.com/analog smaller die size, and a modular process produces components with the minimum www.freescale.com/powermanagement number of process steps for each circuit, minimizing overhead. ANALOG AND MIXED SIGNAL PRODUCTS Power Actuation — Low-Side Switches (Solid State Intelligent Switches) Product Description No of High-Side Continuous Current RDS(on) (mΩ) Current Current Limitation Control1 Status/Fault Protection Features Packaging Status Outputs or Low-Side Each Output (A) of Each Output Limitation (A) Standby Max (µA) Reporting MC33800 Engine Control IC, with Eight Low Side Switches, 8 L 0.35 700 6.0 30 Parallel, SPI Open Load detect, 54-pin SOICW Production Two Constant Current Low Side Switches and Six SPI Overcurrent protect, EVB MOSFET gate pre-drivers Overvoltage protect, Shorted Load detect, Undervoltage protect, Thermal protect MC33810 Engine Control Integrated Circuit capable of driving a 4 L 1.0 100 6.0 30 Parallel, SPI Status Shorted Load detect, 32-pin SOICW Production combination of four Low Side loads and four SPI Flags Thermal protect Exposed Pad 1Q2008 MOSFETs or IGBT gates MC33879 (1.0 Ω RDS(on)) Configurable Eight Output SPI 8 H/L 0.35 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, 32-pin SOICW Production Controlled Switch 2 PWM Temp Sense Exposed Pad MC33880 (1.0 Ω RDS(on)) Configurable Eight Output SPI 8 H/L 0.5 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, 32-pin SOICW Production Controlled Switch 2 PWM Temp Sense EVB MC33882 (0.8 Ω RDS(on)) Smart Six Output Switch with SPI and 8 L 1.0 375 3.0 10 SPI SPI Short Circuit, Current Limit, 30-pin HSOP Production Parallel Input Control Temp Sense 32-pin QFN (7 x 7) MC33996 16 Output Hardware Low-Side Switch with 24-Bit 16 L 0.5 450 1.0 to 2.5 50 SPI SPI Short Circuit, Current Limit, 32-pin SOICW Production Serial Input Control Temp Sense, Open Load EVB MC33999 16 Output Hardware Low-Side Switch with 24-Bit 16 L 0.5 450 1.0 to 2.5 50 SPI and SPI Short Circuit, Current Limit, 54-pin SOICW Production Serial Input Control and 8 Parallel Control Parallel Temp Sense, Open Load EVB 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Board. A change bar appears in the left margin to mark the location of new or revised information. SG187–2 Rev 29

ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — High-Side Switches (Solid State Intelligent Switches) Product Description No of High-Side Continuous Current RDS(on) (mΩ) Current Current Limitation Control1 Status/Fault Protection Features Packaging Status Outputs or Low-Side Each Output (A) of Each Output Limitation (A) Standby Max (µA) Reporting MC33580B Quad High Side Switch (15 mΩ), 4 H 10 15 100 5.0 SPI and SPI, Status Pin Overcurrent, Over Temperature, 24-pin PQFN Production with Protection and Diagnostics Parallel Short Circuit, Reverse Battery, Undervoltage Lock Out MC33874B Quad High Side Switch (35 mΩ), 4 H 5 35 55 5.0 SPI and SPI, Status Pin Overcurrent, Over Temperature, 24-Pin PQFN Production with Protection and Diagnostics Parallel Short Circuit, Reverse Battery, Undervoltage Lock Out MC33879 (1.0 Ω RDS(on)) Configurable Eight 8 H/L 0.35 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, Temp 32-pin SOICW Production Output SPI Controlled Switch 2 PWM Sense Exposed Pad MC33880 Configurable Eight Output SPI 8 H/L 0.5 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, Temp 32-pin SOICW Production Controlled Switch 2 PWM Sense EVB MC33888 Quad High-Side Switch and Octal 12 H/L 2 @ 10 A 2 x 10, 45/20 5.0 SPI SPI Short Circuit, Current Limit, Temp 36-pin PQFN Production Low-Side Switch 8 @ 500 mA 2 x 40, Sense, Current Recopy 2 @ 5.0 A 8 x 600 MC33981B Single High Side Switch (4.0 mΩ), 1 H 40.0 4 100 5.0 Parallel Status Pin, Overcurrent, Over Temperature, 16-pin PQFN Production with PWM, Protection and Current Monitor, Short Circuit, Undervoltage Lock Diagnostics Temperature Out MC33982B Self Protected 2 mΩ Switch with 1 H 60.0 2 100 or 150 5.0 SPI and SPI Temp Sense, Over/Undervoltage, 16-pin PQFN Production Diagnostic and Protection Selectable Parallel Shutdown, Overcurrent, Reverse EVB Polarity, Current Recopy MC33984B Self Protected 4 mΩ Switch with 2 H 30.0 4 100 or 75 5.0 SPI and SPI Temp Sense, Over/Undervoltage, 16-pin PQFN Production Diagnostic and Protection Selectable Parallel Shutdown, Overcurrent, Reverse EVB Polarity, Current Recopy MM908E621 See parameters on page 7 MM908E622 See parameters on page 7 MM908E624 See parameters on page 7 MM908E625 See parameters on page 7 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Power Actuation — H-Bridges and Motor Drivers Product Description Main Characteristics No of RDS(on) Peak Current Current Control1 Status Protection Features Packaging Status Outputs (mΩ) Limitation Limitation Reporting of Each (A) Standby Max Output MC33886 H-Bridge Driver (5.2 A) 225 mΩ @150°C 2 120 6.0 20 mA Parallel 1 Status Pin Short Circuit, Current Limit, 20-pin HSOP Production (Overcurrent / Temp Sense EVB Overtemp) MC33887 H-Bridge Driver with Sleep Mode (5.2 A) 130 mΩ @ 25°C, sleep 2 130 6.0 25 µA Parallel 1 Status Pin Short Circuit, Current Limit, 20-pin HSOP Production mode, current sense (Overcurrent / Temp Sense 54-pin SOICW EVB Overtemp) 36-pin PQFN MC33899 Programmable H-Bridge Power IC Designed to drive a DC 2 100 11.5 50 µA SPI and SPI Open Circuit detect, Undervoltage, 30-pin HSOP Production motor in both forward and Parallel Over Temperature Shutdown, 1Q2008 reverse shaft rotation under Output Short Protect, Short Circuit pulse-width modulation Current Limit (PWM) of speed and torque. MC33926 5.0A Throttle Control H-Bridge H-Bridge power IC for DC 2 120 8.0 50 µA Parallel Status Flag Output Short Circuit Protect, 32-pin PQFN Production servo motor control like Overcurrent Limit, Over 2Q2008 engine throttle control. Load Temperature can be PWM’ed up to 20 KHz 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards A change bar appears in the left margin to mark the location of new or revised information. SG187–3 Rev 29

ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — H-Bridge Stepper Motors Product Description Main Characteristics Operating Packaging Status Voltage (V) MC33970 Dual Gauge Driver Large Pointer 4 Dual Output H-Bridge coil drivers, MMT-licensed two-phase stepper motor compatible, analog 6.2 to 26 24-pin SOICW Production microstepping (12-steps/deg of pointer movement) MC33976 Dual Gauge Driver with Configurable Response Time 4 Dual Output H-Bridge coil drivers, MMT-licensed two-phase stepper motor compatible, analog 6.2 to 26 24-pin SOICW Production microstepping (12-steps/deg of pointer movement) with unproved pointer movement MC33977 Single Gauge Driver Monolithic IC has 4 Output H-Bridge coil drivers and their associated control and management 6.2 to 26 24-pin SOICW Production logic, automatically controls speed, direction, and magnitude of current MC33991 Dual Gauge Driver Integrated Circuit 4 Dual Output H-Bridge coil drivers, MMT-licensed two-phase stepper motor compatible, analog 6.2 to 26 24-pin SOICW Production microstepping (12 steps/dep of pointer movement) MM908E626 Stepper Motor Control, Quad Half-Bridge with Embedded MCU and LIN for Voltage Regulator 5.0 V/60 mA, LIN Physical Layer with Selectable Slewrates 5 to 28 54-pin SOICW Production High Temperature TJ = 135°C Exposed Pad EVB (‘625) Power Actuation — Pre-Drivers (High-Side MOSFET Gate Drivers) Product Description Main Characteristics Operating Input Control1 Output Drives Status Protection Features Packaging Status Voltage (V) High/Low-Side, Reporting Drive Current MC33800 Engine Control Integrated Circuit capable of driving a Engine control IC, with six MOSFET 5 to 36 Parallel, SPI 6 H, 2mA (typ) SPI Open Load detect, 54-pin Production combination of six MOSFETs and ten Low Side loads. gate pre-drivers, eight Low Side Overcurrent protect, SOICW EVB Switches, and two constant current Overvoltage protect, low side switches Shorted Load detect, Undervoltage protect, Thermal protect MC33810 Engine Control Integrated Circuit capable of driving a Engine control IC with four MOSFET/ 4.5 to 36 Parallel, SPI 4 L, 780 µA (typ) SPI, Status Shorted Load detect, 32-pin Production combination of four MOSFETs or IGBT gates and four IGBT gate drivers and four low side Flags Thermal protect SOICW 1Q2008 Low Side loads. switches. Exposed Pad MC33927 Three-Phase Field Effect Transistor Pre-Driver for three- This IC contains three high-side FET 8 to 40 Parallel, SPI 3 H, 3 L, 1.0 A (typ) SPI Programmable Deadtime, 54-pin Production phase motor control pre-drivers and three low-side FET Reverse Charge Injection SOICW Nov. 2007 pre-drivers, with parallel and SPI Protect Exposed Pad EVB control. 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Power Actuation — Squib Drivers Product Description Main Characteristics Regulation Operating Packaging Status Voltage Voltage (V) MC33797 Four Channel Squib Driver IC Four-Channel High-Side and Low-Side 2.0 A FET Switches, Externally Adjustable FET 7.0 to 35 4.75 to 5.25 32-pin SOICW Production Current Limiting, Adjustable Current Limit Range: 0.8 A to 2.0 A, 8-Bit SPI for Diagnostics and FET Switch Activation, Diagnostics for High-Side Safing Sensor Status A change bar appears in the left margin to mark the location of new or revised information. SG187–4 Rev 29

ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — Powertrain Control and Engine Management Product Description Main Characteristics Peak Current RDSON Input Regulation Operating Packaging Status Limit (A) (mOhm) Control1 Voltage Voltage (V) MC33800 Engine Control Integrated Circuit capable of driving a Engine control IC, with six MOSFET gate pre-drivers, eight 2 @ 6.0 8 @ 700 SPI, — 5 to 36 54-pin SOICW Production combination of six MOSFETs and ten Low Side loads. Low Side Switches, and two constant current low side 6 @ 2.0 1 @ 250 Parallel EVB switches 1 @ 2.5 MC33810 Engine Control Integrated Circuit capable of driving a Engine control IC with four MOSFET/IGBT gate drivers and 6.0 100 SPI, — 4.5 to 36 32-pin SOICW Production combination of four MOSFETs or IGBT gates and four four low side switches. Parallel Exposed Pad 1Q/2008 Low Side loads. MC33811 5 Input Solenoid Monitor IC 5 input solenoid monitoring to verify proper electrical and — — SPI — 10.5 to 15.5 16-pin SOICW Production mechanical solenoid operation. 1Q2008 MC33899 Programmable H-Bridge Power IC Designed to drive a DC motor in both forward and reverse 15.0 90 SPI, — 6 to 26.5 30-pin HSOP Production shaft rotation under pulse-width modulation (PWM) of Parallel 1Q2008 speed and torque. MC33926 5.0A Throttle Control H-Bridge H-Bridge power IC for DC servo motor control like engine 8.0 120 Parallel — 8 to 28 32-pin PQFN Production throttle control. Load can be PWM’ed up to 20 KHz 2Q2008 MC33927 Three-Phase Field Effect Transistor Pre-Driver for three- This IC contains three high-side FET pre-drivers and three — — SPI, — 8 to 40 54-pin SOICW Production phase motor control low-side FET pre-drivers, with parallel and SPI control. Parallel Exposed Pad Nov. 2007 EVB MC33975 22 input Multiple Switch Detect Interface with 32 mA 22 inputs contact monitoring (14 GND, 8 configurable), 4.0 — — SPI — 5.5 to 26.5 32-pin SOICW Production MC33975A Wetting Current and Wake-up mA or 32 mA pulse wetting current, low-power mode Exposed Pad interrupt capability, wakeup. 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Network Transceivers — CAN Physical Interface Components Product Description Main Characteristics Communication Operating Current Other Features Control and Protection Packaging Status Protocol Voltage Limitation Standby Status Features (V) (µA) Reporting1 Typ Max MC33742 System Basis Chip with Enhanced SBC, Dual VREG, Enhance HS CAN with CAN HS dual wire 5.5 to 27 60 150 Low power modes, remote and 4 MHz SPI Current and 28-pin SOICW Production MC33742S High Speed CAN (250k to 1Mbps) Bus failure diagnostic capability, 4 wakeup local wakeup capabilities (for diag) thermal protection 48-pin QFN EVB inputs, pin and function compatible with for CAN and MC33989 regulator MC33889B System Basis Chip Lite with Low- Dual VREG, LS CAN, 2 wakeup inputs CAN low-speed, 5.5 to 27 100 100 Dual voltage regulator, SPI 4 MHz Fault tolerant 28-pin SOICW Production MC33889D Speed CAN dual wires watchdog, wake input, sleep and stop modes MC33897C Single-Wire CAN Low or high (33.3 kbps or 83.3 kbps data SW CAN 6.0 to 27 45 60 Regulator Control Output 2 Mode Thermal shutdown, 14-pin SOICN Production MC33897D rates, wakeup capability (GMW3089 v2.3 Waveshaping Undervoltage Control Pins current limit 8-pin SOICN compatible) lockout detect and handle loss of GND MC33989 System Basis Chip with High-Speed SBC dual VREG, HS CAN, 4 wakeup CAN high-speed, 5.5 to 27 150 150 Dual voltage regulator, SPI 4 MHz n/a 20-pin HSOP Production CAN inputs dual wires watchdog, wake input, sleep 28-pin SOICW EVB mode, and cyclic sense 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG187–5 Rev 29

ANALOG AND MIXED SIGNAL PRODUCTS (continued) Network Transceivers — LIN, ISO-9141, J-1850 Physical Interface Components Product Description Main Characteristics Communication Operating Current Other Control and Protection Packaging Status Protocol Voltage Limitation Standby Features Status Features (V) (µA) Reporting1 Typ Max MC33399 Local Interconnect Network (LIN) LIN: Local Interconnect Network Physical LIN single wire 7.0 to 27 20 50 Wakeup input pin, control of Parallel Current limitation, 8-pin SOICN Production Physical Layer Interface external voltage regulator Communication thermal protection EVB MC33661 eLIN – Enhanced LIN Physical Layer Selectable slew rate for operations at 10, LIN single wire 5.5 to 27 8.0 12 Compatibility with 5.0 V and Parallel Current limitation, 8-pin SOICN Production (Local Interconnect Network) 20, 100 kbps; bus short to ground fail 3.3 V micros, wakeup input Communication thermal protection EVB safe; excellent EMC behavior, pin and control of external regulator function compatible with MC33399 MC33689 System Basis Chip with Enhanced LIN Low power modes with remote and local LIN single wire 5.5 to 27 35 45 Dual HS switch (150 mA) 4 MHz SPI Current and 32-pin SOICW Production Physical Interface wakeup; 5.0 V/60 mA VREG with reset and single HS switch (for diag) thermal protection EVB and selectable W/D; enhanced LIN (50 mA) 2 wakeup inputs, for LIN, regulator physical layer (same as MC33661) sense amplifier, overvoltage and HS switches and undervoltage detection MC33689D 35 45 MC33910 2nd Generation System Basis Chip LIN 2.0 compatible, 5.0 v60mA LDO, 2 LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up 32-pin LQFP Production with High Side Drivers high-side drivers w/PWM, 1 analog/digital Configurable Window 4 MHz sources, LDO Fault input Watchdog Detect, Low Voltage Reset MC33911 2nd Generation System Basis Chip LIN 2.0 compatible, 5.0 v60mA LDO, 1 LIN single wire 5.5 to 18 48 80 Configurable Window SPI Multiple wake-up 32-pin LQFP Production with DC Motor Pre-driver high-side driver & 2 low-side drivers w/ Watchdog 4 MHz sources, LDO Fault PWM, 2 analog/digital inputs Detect, Low Voltage Reset MC33912 2nd Generation System Basis Chip LIN 2.0 compatible, 5.0 v60mA LDO, 2 LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up 32-pin LQFP Production with DC Motor Pre-driver and Current high-side drives & 2 low-side drivers w/ Configurable Window 4 MHz sources, LDO Fault Sense PWM, 4 analog/digital inputs Watchdog, Current Sense Detect, Low Voltage Reset MC33990 Serial Link J-1850 Bus Transceiver J-1850 multiplexing bus with loss of J-1850 9.0 to 16 n/a 65 Internally reverse battery Parallel Current limitation, 8-pin SOICN Production ground protection protected Communication thermal protection Waveshaping 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Network Transceivers — Distributed Systems Interface Components Product Description Main Characteristics System Type No of Current Limit Max Voltage Communication Packaging Status Channels (mA) (V) Protocol1 MC33780 Dual DBUS Master with Differential Drive and Master device for two differential DBUS buses. Interfaces the Distributed 2 400 26.5 SPI/DSI 16-pin Production Frequency Spreading buses to a standard SPI port. SOICW MC33793 Distributed System Interface (DSI) Share Interface 4-channel, 8-bit A-to-D converter, 5.0 V regulated output from Distributed 4 6.0 40 DSI 16-pin SOICN Production Sensor DSI bus, configurable I/O, fault tolerant, high drive output 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Signal Conditioning Product Description Main Characteristics Switch Monitor Operating Packaging Status Voltage (V) Voltage (V) MC33811 5 Input Solenoid Monitor IC 5 input solenoid monitoring to verify proper electrical and mechanical solenoid 0 to 64 10.5 to 15.5 16-pin SOICW Production operation. 1Q2008 MC33884 Switch Monitor Interface 12 input contact monitoring (6 GND, 2 VBAT, 4 configurable), 25 mA pulse wetting -14 to 40 7.0 to 26 24-pin SOICW Production current, master, slave, and low-power mode interrupt capability. MC33972 22 input Multiple Switch Detect Interface with 16 mA Wetting Multiple switch detection interface with suppressed wake-up designed to detect -14 to 38 5.5 to 26 32-pin SOICW Production MC33972A Current and Suppressed Wake-up closing and opening of up to 22 switch contacts (14 GND, 8 configurable), wetting -14 to 40 EVB current of 2.0 mA or 16 mA. MC33975 22 input Multiple Switch Detect Interface with 32 mA Wetting 22 inputs contact monitoring (14 GND, 8 configurable), 4.0 mA or 32 mA pulse -14 to 38 5.5 to 26.5 32-pin SOICW Production MC33975A Current and Wake-up wetting current, low-power mode interrupt capability, wakeup. -14 to 40 Exposed Pad MC33993 22 input Multiple Switch Detect Interface with 16 mA Wetting 22 inputs contact monitoring (14 GND, 8 configurable), pulse wetting current of -14 to 40 5.5 to 26.5 32-pin SOICW Production Current and Wake-up 2.0 mA or 16 mA, low-power mode interrupt capability, wakeup. EVB A change bar appears in the left margin to mark the location of new or revised information. SG187–6 Rev 29

ANALOG AND MIXED SIGNAL PRODUCTS (continued) System Basis Chip Product Description Main Characteristics Bus Type Operating Current Other Features Diagnostics1 Protection Features Packaging Status and Standard Voltage Limitation (V) Standby (µA) Typ Max MC33689 System Basis Chip with Enhanced LIN Low power modes with remote and local LIN single wire 5.5 to 27 35 45 Dual HS switch (150 mA) SPI Current and thermal 32-pin Production MC33689D Physical Interface wakeup; 5.0 V/60 mA VREG with reset and and single HS switch 4 MHz protection for LIN, regulator SOICW EVB selectable W/D; enhanced LIN physical layer (50 mA) 2 wakeup inputs, and HS switches (same as MC33661) sense amplifier, overvoltage and undervoltage detection MC33742 System Basis Chip with Enhanced High SBC, Dual VREG, Enhance HS CAN with CAN high-speed 5.5 to 27 60 150 Low power modes, remote SPI Current and thermal 28-pin Production MC33742S Speed CAN (250K to 1Mbps) Bus failure diagnostic capability, 4 wakeup dual wires and local wakeup 4 MHz protection for CAN and SOICW EVB inputs; pin and function compatible with capabilities regulator 48-pin QFN MC33989 MC33889B System Basis Chip with Low Speed Fault Dual 5.0 V regulators LS CAN, CAN low-speed, 5.5 to 27 60 100 Dual voltage regulator, SPI Fault tolerant 28-pin Production Tolerant CAN 2 wakeup inputs dual wires watchdog, wake input, sleep 4 MHz SOICW EVB and stop modes MC33910 2nd Generation System Basis Chip with LIN 2.0 compatible, 5.0 v60mA LDO, 2 high- LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up sources, 32-pin LQFP Production High Side Drivers side drivers w/PWM, 1 analog/digital input Configurable Window 4 MHz LDO Fault Detect, Watchdog Low Voltage Reset MC33911 2nd Generation System Basis Chip with LIN 2.0 compatible, 5.0 v60mA LDO, 1 high- LIN single wire 5.5 to 18 48 80 Configurable Window SPI Multiple wake-up sources, 32-pin LQFP Production DC Motor Pre-driver side driver & 2 low-side drivers w/PWM, Watchdog 4 MHz LDO Fault Detect, 2 analog/digital inputs Low Voltage Reset MC33912 2nd Generation System Basis Chip with LIN 2.0 compatible, 5.0 v60mA LDO, 2 high- LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up sources, 32-pin LQFP Production DC Motor Pre-driver and Current Sense side drives & 2 low-side drivers w/PWM, Configurable Window 4 MHz LDO Fault Detect, 4 analog/digital inputs Watchdog, Current Sense Low Voltage Reset MC33989 System Basis Chip with High Speed CAN Dual 5.0 V regulators HS CAN, CAN high-speed, 5.5 to 27 80 150 Dual voltage regulator, SPI Current limitation, thermal 28-pin Production 4 wakeup inputs dual wires watchdog, wake input, sleep 4 MHz SOICW EVB and stop modes 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Embedded MCU + Power Product Description Main Characteristics Power Features MCU Reference MCU Detail Additional Information Packaging Status MM908E621 DC Motor/Mirror Control and LIN Voltage Regulator 5.0 V/60 mA, LIN 2 x 275 mΩ Half Bridges; MC68HC908EY16 HC08 Core, 16K Flash, 2/3 Pin Hall Sensor Input, Analog 54-pin SOICW Production Mirror Control, Integrated Quad Half- Physical Layer with Selectable Slewrates, 2 x 750 mΩ Half Bridges; 512 Bytes RAM, ESCI, Input with Current Source, 40 V Exposed Pad Eval.1 Bridge and Triple High-Side with Window Watchdog, “Normal/Stop/Sleep 1 x 185 mΩ High Side; 8-Channel 10-bit ADC, 2x2 Rated Wakeup Input, Vsup, Chip Embedded MCU and LIN for High End Mode “Control 2 x 440 mΩ High Side; Channel, 16-bit Timer, Temperature and Current Sensing Mirror Switched 5.0 V Output (25 mA) Internal Clock Generator MM908E622 DC Motor/Mirror Control and LIN Voltage Regulator 5.0 V/60 mA, LIN 2 x 275 mΩ Half Bridges; MC68HC908EY16 HC08 Core, 16K Flash, 2/3 Pin Hall Sensor Input, Analog 54-pin SOICW Production Mirror Control, Integrated Quad Half- Physical Layer with Selectable Slewrates, 2 x 750 mΩ Half Bridges; 512 Bytes RAM, ESCI, Input with Exposed Pad Eval.1 Bridge, Triple High-Side and EC Glass Window Watchdog, “Normal/Stop/Sleep 1 x 185 mΩ High Side; 8-Channel 10-bit ADC, 2x2 Current Source, 40 V Rated Driver with Embedded MCU and LIN Mode “Control 2 x 440 mΩ High Side; Channel, 16-bit Timer, Wakeup Input, Vsup, Chip for High End Mirror Switched 5.0 V Output (25 mA) Internal Clock Generator Temperature and Current Sensing EC Glass Driver MM908E624 DC Motor Control Using Relays (for Voltage Regulator 5.0 V/50 mA, LIN 1 x 7 Ω High Side, MC68HC908EY16 HC08 Core, 16K Flash, Operational Amplifier, 2 x 40 V 54-pin SOICW Production example, Window Lift, Sun Roof, and Physical Layer with Selectable Slewrates, 2 x 2.5 Ω High-Side Switches for 512 Bytes RAM, ESCI, Rated Wakeup Inputs EVB Power Seats), Triple High-Side Switch Window Watchdog with Selectable Timing, Relay Control 8-Channel 10-bit ADC, 2x2 with Embedded MCU + Power + LIN Normal/Stop/Sleep Mode Control Channel, 16-bit Timer, Internal Clock Generator MM908E625 Mirror Control, Stepper Motor Control, Voltage Regulator 5.0 V/60 mA, LIN 4 x 400 mΩ Half Bridges with MC68HC908EY16 HC08 Core, 16K Flash, 3 x 2 Pin Hall Sensor Inputs with 54-pin SOICW Production Door Lock Quad Half-Bridge and Physical Layer with Selectable Slewrates, Current Control; 512 Bytes RAM, ESCI, Cyclic Wakeup Feature, Analog Exposed Pad EVB Single High-Side with Embedded Timeout Watchdog with Periodic Wakeup 1 x 600 mΩ High Side; 8-Channel 10-bit ADC, 2x2 Input with Current Source, Vsup, MCU and LIN Feature, Normal/Stop Mode Control Switched 5.0 V Output (25 mA) Channel, 16-bit Timer, Chip Temperature and Current Internal Clock Generator Sensing MM908E626 Stepper Motor Control, Quad Half- Voltage Regulator 5.0 V/60 mA, LIN 4 x 400 mΩ Half Bridges with MC68HC908EY16 HC08 Core, 16K Flash, 512 Vsup, Chip Temperature and 54-pin SOICW Production Bridge with Embedded MCU and LIN Physical Layer with Selectable Slewrates Current Control; Bytes RAM, ESCI, Current Sensing Exposed Pad EVB for High Temperature TJ = 135°C Switched 5.0 V Output (24 mA) 8-Channel 10-bit ADC, 2x2 (use ‘625) Channel, 16-bit Timer, Internal Clock Generator 1 KIT908EINTFC board is available. A change bar appears in the left margin to mark the location of new or revised information. SG187–7 Rev 29

FREESCALE SEMICONDUCTOR POWER MANAGEMENT PRODUCTS The Power Management products portfolio provides solutions for Linear and Switching Benefits—Freescale Semiconductor SMARTMOS technology brings a wide range of benefits voltage regulators. Hot Swap control and Power over Ethernet devices for use in applications to today’s designs, including component reductions, power flexibility, durability, efficiency, ranging from Consumer and Industrial to Automotive. precision, high-performance analog, and robustness. SMARTMOS™—Freescale Semiconductor SMARTMOS technology allows designers to Packaging - Freescale devices may be offered in EPP and RoHS compliant packages; view interface high-precision components with the harsh automotive environment. the external web for specifics. Cost-Effective—Ideally suited for rugged automotive applications, SMARTMOS solutions offer For additional information, visit: a cost-effective blend of analog, digital, and robust power silicon that enables integrated, Documentation, Tool, and Product Libraries mixed-signal, power control ICs. www.freescale.com Functionality—SMARTMOS solutions implement traditional analog functions with smaller die www.freescale.com/analog size, and a modular process produces components with the minimum number of process www.freescale.com/powermanagement steps for each circuit, minimizing overhead. POWER MANAGEMENT PRODUCTS Power Management — Linear Regulators Product Description Main Characteristics Bus Type and Operating Current Other Features Diagnostics1 Protection Features Packaging Status Standard Voltage (V) Limitation Standby (µA) Typ Max MC33689 System Basis Chip with Low power modes with remote and local LIN single wire 5.5 to 27 35 45 Dual HS switch (150 mA) and single SPI Current and thermal 32-pin SOICW Production enhanced LIN physical wake up; 5.0 V/60 mA VREG with reset and HS switch (50 mA) 4 MHz protection for LIN, EVB interface selectable W/D; enhanced LIN physical 2 wake up input regulator and HS layer (same as MC33661) Sense amplifier switches MC33689D 35 45 Over and Under voltage detection MC33730 Switch Mode Power Supply Step-down Switching regulator (2.0A), with n/a 4.5 to 28 150 — Programmable voltage regulator, None Reverse Battery Protect, 32-pin Production with Multiple Linear 3 Programmable Linear Regulators (15mA, power sequencing, adjustable OSC - Undervoltage and SOICW-EP 2Q2008 Regulators and Power 15mA, 15mA) and 2 5.0V Sensor supplies Switcher Overvoltage Lockout, Sequencing (100mA, 100mA). Reset monitor signals for regulators (4) MC33742 System Basis Chip with SBC, Dual VREG, Enhance HS CAN with Bus CAN HS dual 5.5 to 27 60 150 Low power modes SPI Current and thermal 28-pin SOICW Production enhanced High Speed CAN failure diagnostic capability, 4 wake up inputs; wire Remote and local wake up input 4 MHz protection for CAN and EVB MC33742S (250k to 1Mbps) Pin and function compatible with MC33989 capabilities regulator MC33889B System Basis Chip with Low Dual 5.0 V regulators LS CAN, CAN low-speed, 5.5 to 27 60 100 Dual voltage regulator, watchdog, SPI Fault tolerant 28-pin SOICW Production Speed Fault Tolerant CAN 2 wake up inputs dual wires wake input, sleep and stop modes 4 MHz EVB MC33989 System Basis Chip with High Dual 5.0 V regulators HS CAN, CAN high speed, 5.5 to 27 80 150 Dual voltage regulator, watchdog, SPI Current limitation, 28-pin SOICW Production Speed CAN 4 wake up inputs dual wires wake up input, sleep and stop modes 4 MHz thermal EVB 1 Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Power Management — Switching Regulators Product Description Main Characteristics Operating Input Voltage (V) Output Voltages Protection Features Packaging Status MC33730 Switch Mode Power Supply with Multiple Step-down Switching regulator (2.0A), with 3 4.5 to 28 4.9 to 5.1V, Reverse Battery Protect, Undervoltage 32-pin Production Linear Regulators and Power Sequencing Programmable Linear Regulators (15mA, 15mA, 2.0 to 3.3V, and Overvoltage Lockout, Reset SOICW-EP 2Q2008 15mA) and 2 5.0V Sensor supplies (100mA, 1.5 to 3.3V, monitor signals for regulators (4) 100mA). 1.0 to 5.0V, 5.0V MC33998 2.6/5.0 Volt Switching Power Supply for Step-down switching regulator, 3.3 V linear regulator, 6.0 to 26.5 5.0 V @ 1400 mA Undervoltage shutdown, VDDH current 24-pin SOICW Production Engine control 2.6 V standby regulator, 2 x 5.0 V sensor supply, (40 transient) 2 x 5.0 V @ 200 mA limit, VKAM current limit, short circuit to power sequencing, and reset 2.6 V @ 400 mA GND, short circuit to VPWR 2.6 V @ 10 mA A change bar appears in the left margin to mark the location of new or revised information. SG187–8 Rev 29

FREESCALE SEMICONDUCTOR AUTOMOTIVE SENSORS Sensor Products—Our focus is on new products that will continue to meet customers’ needs. Pressure Sensors—Our pressure sensors are silicon micromachined products with integrated The accelerometer product offering continues to expand. Pressure sensor offerings continue on-chip circuitry. These devices are ideal for a microprocessor interface and are designed to with automotive grade products and tire pressure monitoring. perform in the automotive environment. Accelerometers—We use surface micromachining technology for a capacitive “sensing” Applications—Freescale Semiconductor automotive sensors are designed for a variety of structure. A g-cell is coupled with a control chip for signal amplification, signal conditioning, applications ranging from safety and performance to comfort and control. Our sensors are low-pass filter, and temperature compensation. The packaging choices have expanded to used in under-hood and in-cabin applications, and are compatible with the Freescale include the Quad Flat No-Lead (QFN) Pb-free 6x6x1.45 mm package. Semiconductor Microcontroller Families. Proximity Sensors—Freescale's electric-field sensing ICs use low-level capacitance sensing For additional information, visit the Automotive Home Page at: for occupant protection systems. These devices are ideal for smart airbag deployment based www.freescale.com/automotive on sensing the occupant's size and position in the vehicle. AUTOMOTIVE SENSORS Pressure Sensors Product Maximum Full Scale Span Voltage Sensitivity Accuracy 0°C to 85°C Packaging Status Pressure Rating (kPa) (Typical) (Vdc) (mV/kPa) (% of VFSS) MPX4100A 105 4.6 54 ±1.8 Small outline package (SOP) Available MPXAZ4100A 105 4.6 54 ±1.8 SOP — media resistant package Available MPXV5004 4 3.9 1000 ±2.5 SOP Available MPXV5010G 10 4.5 450 ±5.0 SOP Available MPX5100 100 4.5 45 ±2.5 6-pin unibody package Available MPX5700 700 4.5 6.4 ±2.5 6-pin unibody package Available MPX5999D 1000 4.5 4.5 ±2.5 6-pin unibody package Available MPXH6101 102 4.6 54 ±1.8 Super-small outline package (SSOP) Available MPXA6115A 115 4.6 45.9 ±1.5 SOP Available MPXV6115V 115 4.6 45.9 ±1.5 SOP Available MPXH6250 250 4.7 20 ±1.5 SOP Available MPXH6300 300 4.7 16 ±1.8 SSOP Available MPXH6400 400 4.7 12 ±1.5 SSOP Available MPXV7007 7 4.0 286 ±5.0 SOP Available MPXV7025 25 4.5 90 ±5.0 SOP Available Inertial Sensors1 Product Sensing Acceleration (g) Sensitivity (mV/g) Equivalent Temperature Range Roll-Off Packaging Status Status Direction Self-Test Output Frequency Pin MMA1260EG Z 1.5g 1200 2g -40°C to +105°C 50 Hz 16-pin SOIC Yes Available MMA2260EG X 1.5g 1200 2g -40°C to +105°C 50 Hz 16-pin SOIC Yes Available MMA1270EG Z 2.5g 750 1.7g -40°C to +105°C 50 Hz 16-pin SOIC Yes Available MMA1250EG Z 5g 400 3g -40°C to +105°C 50 Hz 16-pin SOIC Yes Available MMA1220EG Z 8g 250 5g -40°C to +85°C 250 Hz 16-pin SOIC Yes Available MMA2201EG X 40g 50 12g -40°C to +125°C 400 Hz 20-pin SOIC Yes Available MMA3201EG XY 40g 50 12g -40°C to +125°C 400 Hz 20-pin SOIC Yes Available MMA2202EG X 50g 40 12g -40°C to 125°C 400 Hz 16-pin SOIC Yes Available MMA1200EG Z 250g 8 75g -40°C to +125°C 400 Hz 16-pin SOIC Yes Available MMA1212EG Z 200g 10 40g -40°C to +105°C 400 Hz 16-pin SOIC Yes Available MMA2300EG X 250g 8 30g -40°C to +125°C 400 Hz 16-pin SOIC Yes Available 1. Freescale Semiconductor reserves the right to modify product specifications and/or introduction dates without any further notice. The product parameters are typical values at VDD = 5 V and T = 25×C, unless otherwise specified. Additional sensitivity and expanded temperature ranges are available upon request. Consult your Freescale Semiconductor sales representative. Proximity Sensors Product Description Main Characteristics No. of Channels 5 V Reg. Max Voltage Operating Temp Communications Packaging Status Current Limit (mA) (V) Range (°C) MC33794DWBR2 Electric Field Imaging Device 120 kHz generator, shield driver, 9 electrodes + 2 VREF 11 75 40 -40 – 85 ISO-9141 54-pin SOICW EVB outputs, 5 V regulator, MCU support Available MC33941EGR2 Electric Field Imaging Device Selectable from 60 kHz to 240 kHz generator, shield 7 75 40 0 – 110 N/A 24-pin SOICW EVB driver, 7 electrodes, 5 V regulator Available SG187–9 Rev 29

FREESCALE SEMICONDUCTOR ACCESS AND REMOTE CONTROL PRODUCTS For additional information, visit: Documentation, Tool, and Product Libraries Automotive Home Page www.freescale.com www.freescale.com/automotive ACCESS AND REMOTE CONTROL PRODUCTS Transmitters and Receivers Stand-Alone RF Products Product RF Type RF Frequency Protocols Clock Type Bandwidth Sensitivity Temperature Package Additional Features In Market Focus Supported Production MC33596 Receiver 315 MHz - 915 MHz OOK and FSK Programmable PLL 380 kHz -103 dBm to -81 dBm -40ºC to +85ºC 32-pin LQFP, RSSI (75 dB digital and 55 dB analog), Strobe Yes UHF RF Receiver, Demodulation and Strobe OSC typ in 4 steps 32-pin QFN OSC and Data Manager with clock recovery for RF, Remote and Manchester coded signals, context switching Secure Entry MC33493 Transmitter 315 MHz, 434 MHz or OOK and FSK PLL with integrated — +5 dBm output power -40ºC to +125ºC 14-pin TSSOP 11 kbps max data rate for Manchester code Yes Remote/Secure 868 MHz - 915 MHz Demodulation VCO Entry (1-way RF) MC33696 Transceiver 315 MHz - 915 MHz OOK and FSK Programmable PLL 380 kHz -103 dBm to -81 dBm -40ºC to +85ºC 32-pin LQFP, RSSI (75 dB digital and 55 dB analog), Strobe Yes UHF RF Transceiver, Demodulation and Strobe OSC typ in 4 steps 32-pin QFN OSC and Data Manager with clock recovery for Remote and Secure Manchester coded signals, context switching Entry (2-way RF) Tag Reader (STARC) for Immobilizer Applications Product Description Packaging Band Data Rate MCU Interface Operating Voltage Status MC33690 Stand-alone TAG reader with voltage regulator 20-pin SOIC 125 kHz 0.5 to 8 kbps K line (ISO-9141) 12 V Available Tire Pressure Monitoring Solutions Product RF Type Flash RAM RF Protocols Sup- Clock Type ADC SPI Timer Package Additional In Market Focus Frequency ported Features Production MPXY80201 Transmitter 16 KB 512 B 315 MHz/434 MHz ASK and FSK OSC 8-CH, 10-bit 1 2-CH, 16-bit Timer/ SOIC Pressure Package PZT Motion Sensor TPMS RF Transmitter Modulation Pulse-Width Modulator (Motion Sensor-Based) MPXY8300A Transmitter 16 KB 512 B 315MHz/434MHz ASK and FSK OSC 8Ch., 10-bit 1 2-ch, 16-bit Timer/ SOIC Pressure Package X-Z Axis Accelerometer Auto TPMS RF Transmitter Modulation Pulse-Width Modulator (Accelerometer-Based) MPXY8300B Transmitter 16 KB 512 B 315MHz/434MHz ASK and FSK OSC 8Ch., 10-bit 1 2-ch, 16-bit Timer/ SOIC Pressure Package Z Axis Accelerometer Auto TPMS RF Transmitter Modulation Pulse-Width Modulator (Accelerometer-Based) MPXY8300C Transmitter 16 KB 512 B 315MHz/434MHz ASK and FSK OSC 8Ch., 10-bit 1 2-ch, 16-bit Timer/ SOIC Pressure Package Auto TPMS RF Transmitter Modulation Pulse-Width Modulator (Accelerometer-Based) MPXY8320A Transmitter 16 KB 512 B 315MHz/434MHz ASK and FSK OSC 8Ch., 10-bit 1 2-ch, 16-bit Timer/ SOIC Pressure Package X-Z Axis Accelerometer Truck TPMS RF Transmitter Modulation Pulse-Width Modulator Accelerometer-Based) MPXY8320B Transmitter 16 KB 512 B 315MHz/434MHz ASK and FSK OSC 8Ch., 10-bit 1 2-ch, 16-bit Timer/ SOIC Pressure Package Z Axis Accelerometer Truck TPMS RF Transmitter Modulation Pulse-Width Modulator (Accelerometer-Based) MPXY8320C Transmitter 16 KB 512 B 315MHz/434MHz ASK and FSK OSC 8Ch., 10-bit 1 2-ch, 16-bit Timer/ SOIC Pressure Package Truck TPMS RF Transmitter Modulation Pulse-Width Modulator Accelerometer-Based) GPS Downconverter Product RF Freq (MHz) Supply Voltage Supply Current (Typ) Standby Current Conversion Gain Packaging System Documentation Range (Vdc) (mA) (mA) (typ) (dB) Applicability MRFIC1505A 1575.42 2.7 to 3.3 28 3 105 48-pin LQFP GPS MRFIC1505 (Case No 932) A change bar appears in the left margin to mark the location of new or revised information. SG187–10 Rev 29

S08 MICROCONTROLLERS — FREESCALE'S LATEST GENERATION WITH UP TO 40 MHZ CPU SPEED, FULL ON-CHIP IN-CIRCUIT EMULATION (ICE), AND ON-CHIP BACKGROUND DEBUG MODE (BDM) Freescale Semiconductor introduces the low power S08 family as a higher performance • Faster and more accurate LIN communication using the Slave LIN Interface Controller extension to the successful HC08 family. Based on the enhanced S08 core, the new S08 (SLIC) module for LIN2.0 and SAE J2602 compliance families can deliver 2.5 times the performance of an 8 MHz HC08 with instruction set • Built-in secondary 1 kHz low power oscillator for watchdog applications compatibility, and also provides on-chip debug tools to allow faster development. The S08 • Real Time Clock for calendar and time of day functions family will deliver up to 40 MHz (clock) / 20 MHz (bus) at 2.7-5.5 V and up to 8 MHz (bus) • Low power Analog to Digital Controller (ADC) with on-chip temperature sensor and at 1.8-3 V while reducing power consumption by using its 2 low power modes. This family Analog comparators provides significantly improved Electro Magnetic Compatibility (EMC) performance • Up to two Serial Communication Interface (SCI) modules and an Inter- compared to HC05/HC08/HC11 performance. Integrated Circuit (IIC) module The S08 families include: • Background Debug Mode (BDM) support similar to successful HCS12 • Embedded EEPROM at external EEPROM prices • On-chip In-Circuit Emulation (ICE) provides free emulation and development support • Higher RAM to FLASH ratios (16:1 vs 32:1 on HC08) • Faster and more robust Controller Area Network (CAN) complaint module S08 Families (Sheet 1 of 2) Root Part Family Flash RAM EEPROM CAN UART SPI IIC SLIC Analog (ADC) Timer Clock Pin Count Additional Features Operating In Market Focus Number Voltage Production 9S08DZ128 DZ 128 KB 8 KB Up to 1 2xSCI 2 2 — 24-CH, 12-bit ADC, Up to 12-CH MCG (PLL, FLL, 100, 64 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 CAN, LIN/J2602, 2 KB 2 comparators OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DV128 DV 128 KB 6 KB — 1 2xSCI 2 2 — 24-CH, 12-bit ADC, Up to 12-CH MCG (PLL, FLL, 100, 64 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 CAN, LIN/J2602, 2 comparators OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DZ96 DZ 96 KB 6 KB Up to 1 2xSCI 2 2 — 24-CH, 12-bit ADC, Up to 12-CH MCG (PLL, FLL, 100, 64 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 CAN, LIN/J2602, 2 KB 2 comparators OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DV96 DV 96 KB 4 KB — 1 2xSCI 2 2 — 24-CH, 12-bit ADC, Up to 12-CH. MCG (PLL, FLL, 100, 64 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 CAN, LIN/J2602, 2 comparators OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DZ60 DZ 60 KB 4 KB Up to 1 2xSCI 1 1 — Up to 24-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, 2 KB ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DV60 DV 60 KB 3 KB — 1 2xSCI 1 1 — Up to 16-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DN60 DN 60 KB 2 KB Up to — 1xSCI 1 1 — Up to 16-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes LIN/J2602, 2 KB ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08AW60 AW 60 KB 2 KB — — 2xSCI 1 1 — Up to 16-CH, Up to ICG 64, 48, 44 40 MHz CPU, KBI, ICE, BDM, Temp Sensor 2.7 to 5.5 Yes LIN/J2602, 10-bit ADC 6-CH + 2-CH High I/O 9S08DZ48 DZ 48 KB 3 KB Up to 1 2xSCI 1 1 — Up to 24-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, 1.5 KB ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DV48 DV 48 KB 2 KB — 1 2xSCI 1 1 — Up to 16-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DN48 DN 48 KB 2 KB Up to — 1xSCI 1 1 — Up to 16-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes LIN/J2602, 1.5 KB ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08AW48 AW 48 KB 2 KB — — 2xSCI 1 1 — Up to 16-CH, Up to ICG 64, 48, 44 40 MHz CPU, KBI, ICE, BDM, Temp Sensor 2.7 to 5.5 Yes LIN/J2602, 10-bit ADC 6-CH + 2-CH High I/O 9S08DZ32 DZ 32 KB 2 KB Up to 1 2xSCI 1 1 — Up to 24-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, 1 KB ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DV32 DV 32 KB 2 KB — 1 2xSCI 1 1 — Up to 16-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DN32 DN 32 KB 1 KB Up to — 1xSCI 1 1 — Up to 16-CH, 12-bit Up to MCG (PLL, FLL, 64, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes LIN/J2602, 1 KB ADC, 2 comparators 6-CH + 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08EN32 EN 32 KB 1 KB — — 1xSCI 1 — — Up to 12-CH, 12-bit 4-CH MCG (PLL, FLL, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes General Market ADC, 1 comparator OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor A change bar appears in the left margin to mark the location of new or revised information. SG187–11 Rev 29

S08 Families (Sheet 2 of 2) Root Part Family Flash RAM EEPROM CAN UART SPI IIC SLIC Analog (ADC) Timer Clock Pin Count Additional Features Operating In Market Focus Number Voltage Production 9S08EL32 EL 32 KB 1 KB Up to — 1xSCI 1 1 1 Up to 16-CH, 10-bit 4-CH + 2-CH ICS 28,20 LIN Auto-Baud/Synch, 40 MHz CPU, 2.7 to 5.5 LIN/J2602, 512 B ADC, 2 comparators Watchdog OSC/Timer, COP, LVI, ICE, BDM, General Market POR, KBI, Temp Sensor 9S08SG32 SG 32 KB 1 KB — — 1xSCI 1 1 — Up to 16-CH, 10-bit 2-CH + 2-CH ICS 28,20,16 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 LIN/J2602, ADC, 1 comparator LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08AW32 AW 32 KB 2 KB — — 2xSCI 1 1 — Up to 16-CH, 10-bit Up to 6-CH + ICG 64, 48, 44 40 MHz CPU, KBI, ICE, BDM, Temp Sensor 2.7 to 5.5 LIN/J2602, ADC 2-CH High I/O 9S08DZ16 DZ 16 KB 1 KB Up to 1 2xSCI 1 1 — Up to 16-CH, 12-bit Up to 6-CH + MCG (PLL, FLL, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, 512 B ADC, 2 comparators 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DV16 DV 16 KB 1 KB — 1 1xSCI 1 1 — Up to 16-CH, 12-bit Up to 6-CH + MCG (PLL, FLL, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes CAN, LIN/J2602, ADC, 2 comparators 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08DN16 DN 16 KB 512 B Up to — 1xSCI 1 1 — Up to 16-CH, 12-bit Up to 6-CH + MCG (PLL, FLL, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes LIN/J2602, 512 B ADC, 2 comparators 2-CH OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08EN16 EN 16 KB 512 B — — 1xSCI 1 — Up to 12-CH, 12 -bit 4-CH MCG (PLL, FLL, 48, 32 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes General Market ADC, 1 comparator OSC) LVI, ICE, BDM, POR, KBI, Temp Sensor 9S08EL16 EL 16 KB 1 KB Up to — 1xSCI 1 1 1 Up to 16-CH, 10-bit 4-CH + 2-CH ICS 28,20 LIN Auto-Baud/Synch, 40 MHz CPU, 2.7 to 5.5 LIN/J2602, 512 B ADC, 2 comparators Watchdog OSC/Timer, COP, LVI, ICE, BDM, General Market POR, KBI, Temp Sensor 9S08SL16 SL 16 KB 512 B Up to — 1xSCI 1 1 1 Up to 16-CH, 10-bit 2-CH + 2-CH ICS 28, 20 LIN Auto-Baud/Synch, 40 MHz CPU, 2.7 to 5.5 LIN/J2602, 256 B ADC, 1 comparator Watchdog OSC/Timer, COP, LVI, ICE, BDM, General Market POR, KBI, Temp Sensor 9S08SG16 SG 16 KB 1 KB — — 1xSCI 1 1 — Up to 16-CH, 10-bit 2-CH + 2-CH ICS 28,20,16 40 MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 LIN/J2602, ADC, 1 comparator LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08AW16A AW 16 KB 1 KB — — 2xSCI 1 1 — Up to 8-CH, 10-bit Up to 4-CH + ICG 48, 44, 32, 40 MHz CPU, KBI, ICE, BDM, Temp Sensor 2.7 to 5.5 Yes LIN/J2602, ADC 2-CH High I/O 9S08SL8 SL 8 KB 512 B Up to — 1xSCI 1 1 1 Up to 16-CH, 10-bit 2-CH + 2-CH ICS 28, 20 LIN Auto-Baud/Synch, 40 MHz CPU, 2.7 to 5.5 LIN/J2602, 256 B ADC, 1 comparator Watchdog OSC/Timer, COP, LVI, ICE, BDM, General Market POR, KBI, Temp Sensor 9S08SG8 SG 8 KB 512 B — — 1xSCI 1 1 — Up to 12-CH, 10-bit Up to 2-CH + ICS 20, 16, 8 40MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 LIN/J2602, ADC, 1 comparator 2-CH LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08AW8A AW 8 KB 768 B — — Up to 1 1 — Up to 8-CH, 10-bit Up to 4-CH + ICG 48, 44, 32, 40MHz CPU, KBI, ICE, BDM, Temp Sensor 2.7 to 5.5 Yes LIN/J2602, 2xSCI ADC 2-CH High I/O 9S08SG4 SG 4 KB 256 B — — 1xSCI 1 1 — Up to 12-CH, 10-bit Up to 2-CH + ICS 20, 16, 8 40MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 LIN/J2602, ADC, 1 comparator 2-CH LVI, ICE, BDM, POR, KBI, Temp Sensor General Market 9S08QD4 QD 4 KB 256 B — — — — — — 4-CH, 10-bit ADC 2-CH + 1-CH ICS 8 16MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes General Market LVI, ICE, BDM, POR, KBI, Temp Sensor 9S08QD2 QD 2 KB 128 B — — — — — — 4-CH, 10-bit ADC 2-CH + 1-CH ICS 8 16MHz CPU, Watchdog OSC/Timer, COP, 2.7 to 5.5 Yes General Market LVI, ICE, BDM, POR, KBI, Temp Sensor A change bar appears in the left margin to mark the location of new or revised information. SG187–12 Rev 29

HC08 MICROCONTROLLERS — UP TO 16 MHZ CPU SPEED, OFF-BOARD FREESCALE SEMICONDUCTOR'S IN-CIRCUIT EMULATION (FSICE), AND ON-CHIP MONITOR MODE Slave LIN Interface Controller (SLIC) Module—A hardware LIN slave protocol Technology—Freescale HC(S)08 products continue to progress to sub-0.5 micron implementation that enables full LIN message buffering of identifier and 8 data bytes. UDR technologies. Selectable 3.2 or 6.4 MHz internal bus operation. Support and Services—Freescale Semiconductor offers a full range of services to Memory—Freescale Semiconductor is a leader in automotive qualified non-volatile accompany all of our microcontrollers, which includes software and hardware memory with integrated EEPROM. Combined with CAN and J1850, this makes development tools and product applications support. Freescale’s portfolio the most successful in the industry. For additional information, visit: msCAN—The integrated msCAN module (available on selected products) offers freescale.com or freescale.com/automotive designers a cost-effective CAN controller which is compliant with parts 2.0a and 2.0b of the CAN specification. HC08 Family (Sheet 1 of 2) Root Part Family Flash ROM RAM EEPROM CAN UART SPI IIC SLIC Analog (ADC) Timer Clock Pin Count Additional Features Operating In Market Focus Number Available Voltage Production 908AZ60A AZ 60 KB Yes 2 KB 1 KB 1 1xSCI 1 — — Up to 15-CH, 8-bit 6-CH + 2-CH PLL 64 16 MHz CPU, COP, LVI, 4.5 to 5.5 Yes CAN, LIN/J2602 ADC POR, KBI 908AS60A* AS 60 KB 2 KB 1 KB — 1xSCI 1 — — Up to 15-CH, 8-bit 6-CH PLL 64, 52 16 MHz CPU, COP, LVI, 4.5 to 5.5 Yes J1850 ADC POR, KBI 908GZ60 GZ 60 KB Yes 2 KB — 1 1xESCI 1 — — Up to 24-CH, 10-bit Up to 6-CH + PLL 64, 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes CAN, LIN/J2602 ADC 2-CH POR, KBI 908GR60A GR 60 KB Yes 2 KB — — 1xESCI 1 — — Up to 24-CH, 10-bit Up to 6-CH + PLL 64, 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602 ADC 2-CH POR, KBI 908GZ48 GZ 48 KB Yes 1.5 KB — 1 1xESCI 1 — — Up to 24-CH, 10-bit Up to 6-CH + PLL 64, 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes CAN, LIN/J2602 ADC 2-CH POR, KBI 908GR48A GR 48 KB Yes 1.5 KB — — 1xESCI 1 — — Up to 24-CH, 10-bit Up to 6-CH + PLL 64, 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602 ADC 2-CH POR, KBI 908AZ32A AZ 32 KB Yes 1 KB 512 B 1 1xSCI 1 — — Up to 15-CH, 8-bit 6-CH + 2-CH PLL 64 16 MHz CPU, COP, LVI, 4.5 to 5.5 Yes CAN, LIN/J2602 ADC POR, KBI 908AS32A* AS 32 KB Yes 1 KB 512 B — 1xSCI 1 — — Up to 15-CH, 8-bit 6-CH PLL 64, 52 16 MHz CPU, COP, LVI, 4.5 to 5.5 Yes J1850 ADC POR, KBI 908GZ32 GZ 32 KB Yes 1.5 KB — 1 1xESCI 1 — — Up to 24-CH, 10-bit Up to 6-CH + PLL 64, 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes CAN, LIN/J2602 ADC 2-CH POR, KBI 908GR32A GR 32 KB Yes 1.5 KB — — 1xESCI 1 — — Up to 24-CH, 10-bit Up to 6-CH + PLL 64, 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602 ADC 2-CH POR, KBI 908GZ16 GZ 16 KB Yes 1 KB — 1 1xESCI 1 — — Up to 8-CH, 10-bit Up to 2-CH + PLL 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes CAN, LIN/J2602 ADC 2-CH POR, KBI 908GR16A GR 16 KB Yes 1 KB — — 1xESCI 1 — — Up to 8-CH, 10-bit Up to 2-CH + PLL 48, 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602 ADC 2-CH POR, KBI 908EY16A EY 16 KB Yes 512 B — — 1xESCI 1 — — Up to 8-CH, 10-bit 2-CH + 2-CH ICG 32 16 MHz CPU, COP, LVI, 4.5 to 5.5 Yes LIN/J2602, High temp ADC POR, KBI 908QC16 QC 16 KB Yes 512 B — — 1xESCI 1 — — Up to 10-CH, 10-bit 4-CH + 2-CH OSC 16, 20, 28 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602, Watchdog, ADC POR, KBI General Market 908GR8A GR 8 KB 384 B — — 1xSCI 1 — — Up to 6-CH, 8-bit ADC 2-CH + 1-CH PLL 32 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602, Watchdog, POR, KBI General Market 908EY8A EY 8 KB Yes 384 B — — 1xESCI 1 — — Up to 8-CH, 10-bit 2-CH + 2-CH ICG 32 16 MHz CPU, COP, LVI, 4.5 to 5.5 Yes LIN/J2602, High temp ADC POR, KBI 908QC8 QC 8 KB Yes 384 B — — 1xESCI 1 — — Up to 10-CH, 10-bit 4-CH + 2-CH OSC 16, 20, 28 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602, Watchdog, ADC POR, KBI General Market 908QB8 QB 8 KB Yes 256 B — — 1xESCI 1 — — Up to 10-CH, 10-bit 4-CH OSC 16 16 MHz CPU, COP, LVI, 2.7 to 5.5 Yes LIN/J2602, Watchdog, ADC POR, KBI General Market A change bar appears in the left margin to mark the location of new or revised information. SG187–13 Rev 29

HC08 Family (Sheet 2 of 2) Root Part Family Flash ROM RAM EEPROM CAN UART SPI IIC SLIC Analog (ADC) Timer Clock Pin Count Additional Features Operating In Market Focus Number Available Voltage Production 908QY8 QY 8 KB Yes 256 B — — — — — — Up to 4-CH, 10-bit 2-CH OSC 16 16 MHz CPU, COP, LVI, 2.7 to 5.5 Yes Watchdog, General Market ADC POR, KBI 908QL4 QL 4 KB Yes 128 B — — — — — 1 Up to 6-CH, 10-bit 2-CH OSC 16 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602, Watchdog, ADC POR, KBI General Market 908QC4 QC 4 KB 384 B — — 1xESCI 1 — — Up to 10-CH, 10-bit 4-CH + 2-CH OSC 16, 20, 28 16 MHz CPU, COP, LVI, 3.0 to 5.5 Yes LIN/J2602, Watchdog, ADC POR, KBI General Market 908QB4 QB 4 KB 128 B — — 1xESCI 1 — — Up to 10-CH, 10-bit 4-CH OSC 16 16 MHz CPU, COP, LVI, 2.7 to 5.5 Yes LIN/J2602, Watchdog, ADC POR, KBI General Market 908QY4A QY 4 KB Yes 128 B — — — — — — Up to 6-CH, 10-bit 2-CH OSC 16 16 MHz CPU, COP, LVI, 2.7 to 5.5 Yes Watchdog, General Market ADC POR, KBI 908QY1A QY 1.5 KB Yes 128 B — — — — — — — 2-CH OSC 16 16 MHz CPU, COP, LVI, 2.7 to 5.5 Yes Watchdog, General Market POR, KBI 908QY2A QY 1.5 KB Yes 128 B — — — — — — Up to 6-CH, 10-bit 2-CH OSC 16 16 MHz CPU, COP, LVI, 2.7 to 5.5 Yes Watchdog, General Market ADC POR, KBI * MCU has a J1850 module. 68HC08 Reference Manuals TIM08RM HC08 Timer Reference Manual CPU08RM HC08 CPU Reference Manual A change bar appears in the left margin to mark the location of new or revised information. SG187–14 Rev 29

THE FREESCALE SEMICONDUCTOR S12X 16-BIT MICROCONTROLLER FAMILY S12X—Freescale Semiconductor is introducing the S12X MCU family as a high virtually unlimited number of mailboxes and retains backward compatibility with the performance extension to the established and highly successful HCS12 family. The MSCAN module featured on existing HCS12 products. S12X family will deliver 32-bit performance with all the advantages and efficiencies of a For additional information, visit: 16-bit MCU. Based on enhanced HCS12 core, the S12X D-Family will deliver 2 to 5 times the performance of a 25MHz HCS12 while retaining code compatibility for easy Freescale Semiconductor Documentation, Tool, and Product Libraries migration. The family introduces the performance boosting XGATE module which off www.freescale.com loads the CPU by providing high speed data processing and transfer between peripheral Automotive Home Page modules, RAM, and I/O ports. The XGATE also enables full CAN performance with www.freescale.com/automotive S12X Family (Sheet 1 of 2) Product Flash ROM RAM Data EEPROM I/O Frequency XGATE MPU ECC FlexRay CAN SCI SPI IIC ADC PWM Motor SSD ECT Timer PIT LCD KWU EB Package Options In Flash Production S12XE—Family-High-End Body, Advanced Features, 32-Bit Performance with 16-Bit Efficiency 9S12XEP100 1 MB — 64 KB — 4 KB 152 50 MHz Yes Yes Yes — 5 8 3 2 2 x 16-CH, 8-CH, — — 8-CH, 8-CH, 8-CH — 25 Yes 112-pin LQFP, Yes 12-bit 8-bit 16-bit 16-bit 144-pin LQFP, 208-lead MAPBGA 9S12XEP768 768 KB — 48 KB — 4 KB 152 50 MHz Yes Yes Yes — 5 8 3 2 2 x 16-CH, 8-CH, — — 8-CH, 8-CH, 8-CH — 25 Yes 112-pin LQFP, Yes 12-bit 8-bit 16-bit 16-bit 144-pin LQFP, 208-lead MAPBGA 9S12XEQ512 512 KB — 32 KB — 4 KB 119 50 MHz Yes Yes Yes — 4 6 3 2 2 x 12-CH, 8-CH, — — 8-CH, — 8-CH — 25 Yes 80-pin QFP, 12-bit 8-bit 16-bit 112-pin LQFP, 144-pin LQFP 9S12XEQ384 384 KB — 24 KB — 4 KB 119 50 MHz Yes Yes Yes — 4 4 3 1 2 x 12-CH, 8-CH, — — 8-CH, — 4-CH — 25 Yes 80-pin QFP, 12-bit 8-bit 16-bit 112-pin LQFP, 144-pin LQFP 9S12XET256 256 KB — 16 KB — 4 KB 119 50 MHz Yes Yes Yes — 3 4 3 1 2 x 12-CH, 8-CH, — — 8-CH, — 4-CH — 25 Yes 80-pin QFP, 12-bit 8-bit 16-bit 112-pin LQFP, 144-pin LQFP 9S12XEG128 128 KB — 12 KB — 2 KB 91 50 MHz Yes Yes Yes — 2 2 2 1 2 x 8-CH, 8-CH, — — 8-CH, — 2-CH — 25 Yes 80-pin QFP, 12-bit 8-bit 16-bit 112-pin LQFP S12XS Family—General Body, Reduced Feature Set, High-Performance for Cost-Sensitive Applications 9S12XS256 256 KB — 12 KB 8 KB — 91 40 MHz Yes 1 2 1 — 16-CH, 8-CH, — — — 8-CH, 4-CH — 18 64-pin LQFP, 12-bit 8-bit 16 -bit 80-pin QFP, 112-pin LQFP 3S12XS256 — 256 KB 12 KB — — 91 40 MHz Yes 1 2 1 — 16-CH, 8-CH, — — — 8-CH, 4-CH — 18 64-pin LQFP, 12-bit 8-bit 16 -bit 80-pin QFP, 112-pin LQFP 9S12XS128 128 KB — 8 KB 8 KB — 91 40 MHz Yes 1 2 1 — 16-CH, 8-CH, — — — 8-CH, 4-CH — 18 64-pin LQFP, 12-bit 8-bit 16 -bit 80-pin QFP, 112-pin LQFP 3S12XS128 — 128 KB 8 KB — — 59 40 MHz Yes 1 2 1 — 16-CH, 8-CH, — — — 8-CH, 4-CH — 9 64-pin LQFP, 12-bit 8-bit 16 -bit 80-pin QFP, 112-pin LQFP 9S12XS64 64 KB — 4 KB 4 KB — 91 40 MHz Yes 1 2 1 — 16-CH, 8-CH, — — — 8-CH, 4-CH — 18 64-pin LQFP, 12-bit 8-bit 16 -bit 80-pin QFP, 112-pin LQFP 3S12XS64 — 64 KB 4 KB — — 59 40 MHz Yes 1 2 1 — 16-CH, 8-CH, — — — 8-CH, 4-CH — 9 64-pin LQFP, 12-bit 8-bit 16 -bit 80-pin QFP A change bar appears in the left margin to mark the location of new or revised information. SG187–15 Rev 29

S12X Family (Sheet 2 of 2) Product Flash ROM RAM Data EEPROM I/O Frequency XGATE MPU ECC FlexRay CAN SCI SPI IIC ADC PWM Motor SSD ECT Timer PIT LCD KWU EB Package Options In Flash Production S12XF Family—Chassis, Embedded FlexRayTM Controller for Satellite Nodes S12XF512 512 KB — 32 KB — 4 KB 91 50 MHz Yes Yes Yes 1 2 2 — 16-CH, 6-CH, — — — 8-CH, 4-CH — 11 112-pin LQFP, 12-bit 15-bit 16 -bit 64-pin LQFP S12XF384 384 KB — 24 KB — 4 KB 91 50 MHz Yes Yes Yes 1 2 2 — 16-CH, 6-CH, — — — 8-CH, 4-CH — 11 112-pin LQFP, 12-bit 15-bit 16 -bit 64-pin LQFP S12XF256 256 KB — 20 KB — 2 KB 91 50 MHz Yes Yes Yes 1 2 2 — 16-CH, 6-CH, — — — 8-CH, 4-CH — 11 112-pin LQFP, 12-bit 15-bit 16 -bit 64-pin LQFP S12XF128 128 KB — 16 KB — 2 KB 91 50 MHz Yes Yes Yes 1 2 2 — 16-CH, 6-CH, — — — 8-CH, 4-CH — 11 112-pin LQFP, 12-bit 15-bit 16 -bit 64-pin LQFP S12XH Family—Advanced Instrument Cluster 9S12XHZ512 512 KB — 32 KB — 4 KB 117 40 MHz Yes 2 2 1 2 16-CH, 8-CH, 24/6 6 8-CH, — 4-CH 32 x 4 8 Yes 112-pin LQFP, 10-bit 8-bit 16-bit 144-pin LQFP 9S12XHZ384 384 KB — 28 KB — 4 KB 117 40 MHz Yes 2 2 1 2 16-CH, 8-CH, 24/6 6 8-CH, — 4-CH 32 x 4 8 Yes 112-pin LQFP, 10-bit 8-bit 16-bit 144-pin LQFP 9S12XHZ256 256 KB — 16 KB — 4 KB 117 40 MHz Yes 2 2 1 2 16-CH, 8-CH, 24/6 6 8-CH, — 4-CH 32 x 4 8 Yes 112-pin LQFP, 10-bit 8-bit 16-bit 144-pin LQFP S12XD Family—General Body Applications 9S12XDP512 512 KB — 32 KB — 4 KB 119 40 MHz Yes 5 6 3 2 8-CH, + 8-CH, — — 8-CH, — 4-CH — 24 Yes 112-pin LQFP, Yes 16-CH, 8-bit 16-bit 144-pin LQFP 10-bit 9S12XDT512 512 KB — 20 KB — 4 KB 119 40 MHz Yes 3 6 3 1 8-CH, + 8-CH, — — 8-CH, — 4-CH — 24 Yes 80-pin QFP, Yes 16-CH, 8-bit 16-bit 112-pin LQFP, 10-bit 44-pin LQFP 9S12XDT384 384 KB — 20 KB — 4 KB 119 40 MHz Yes 3 4 3 1 8-CH, + 8-CH, — — 8-CH, — 4-CH — 24 Yes 80-pin QFP, Yes 16-CH, 8-bit 16-bit 112-pin LQFP, 10-bit 44-pin LQFP 9S12XDQ256 256 KB — 16 KB — 4 KB 119 40 MHz Yes 4 4 3 1 8-CH, + 8-CH, — — 8-CH, — 4-CH — 24 Yes 80-pin QFP, 16-CH, 8-bit 16-bit 112-pin LQFP, 10-bit 44-pin LQFP 9S12XDT256 256 KB — 16 KB — 4 KB 119 40 MHz Yes 3 4 3 1 8-CH, + 8-CH, — — 8-CH, — 4-CH — 24 Yes 80-pin QFP, 16-CH, 8-bit 16-bit 112-pin LQFP, 10-bit 44-pin LQFP 9S12XD256 256 KB — 14 KB — 4 KB 119 40 MHz Yes 1 4 3 1 8-CH, + 8-CH, — — 8-CH, — 4-CH — 24 Yes 80-pin QFP, 16-CH, 8-bit 16-bit 112-pin LQFP, 10-bit 44-pin LQFP 9S12XDG128 128 KB — 12 KB — 2 KB 91 40 MHz Yes 2 2 2 1 16-CH, 8-CH, — — 8-CH, — 4-CH — 24 80-pin QFP, Yes 10-bit 8-bit 16-bit 112-pin LQFP 9S12XD128 128 KB — 8 KB — 2 KB 91 40 MHz Yes 1 2 2 1 16-CH, 8-CH, — — 8-CH, — 4-CH — 24 80-pin QFP, Yes 10-bit 8-bit 16-bit 112-pin LQFP 9S12XD64 64 KB — 4 KB — 1 KB 59 40 MHz Yes 1 2 2 1 8-CH, 8-CH, — — 8-CH, — 2-CH — 24 80-pin LQFP Yes 10-bit 8-bit 16-bit S12XB Family—Reduced Feature Set of S12XD Family 9S12XB256 256 KB — 10 KB — 2 KB 91 33 MHz Yes 1 2 1 1 16-CH, 8-CH, — — 8-CH, — 4-CH — 24 80-pin QFP, Yes 10-bit 8-bit 16-bit 112-pin LQFP 9S12XB128 128 KB — 6 KB — 1 KB 91 33 MHz Yes 1 2 1 1 16-CH, 8-CH, — — 8-CH, — 2-CH — 24 80-pin QFP, Yes 10-bit 8-bit 16-bit 112-pin LQFP Note: specs given are for the largest package size stated. A change bar appears in the left margin to mark the location of new or revised information. SG187–16 Rev 29

THE FREESCALE SEMICONDUCTOR HCS12 16-BIT MICROCONTROLLER FAMILY HCS12—Continuing the Freescale Semiconductor legacy of best in class For additional information, visit: automotive MCUs, Freescale Semiconductor provides a full family of 0.25m Flash Freescale Semiconductor Documentation, Tool, and Product Libraries Technology, 16-bit products based on the powerful HCS12 CPU. The entire www.freescale.com family utilizes the latest synthesized design techniques, and will be pin compatible and memory upgradeable, with a variety of on-chip peripheral options. Automotive Home Page www.freescale.com/automotive S12P Family—Entry Level 16-Bit CAN Product for General Body Applications Product Flash ECC RAM Data Flash I/O Frequency CAN SCI SPI IIC ADC PWM Motor SSD Timer LCD KWU Package Options In Production 9S12P128 128 KB Yes 6 KB 4 KB 64 32 MHz 1 1 1 — 10-CH, 12-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 80-pin LQFP, 64-pin LQFP, 48-pin QFN 9S12P96 96 KB Yes 6 KB 4 KB 64 32 MHz 1 1 1 — 10-CH, 12-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 80-pin LQFP, 64-pin LQFP, 48-pin QFN 9S12P64 64 KB Yes 4 KB 4 KB 49 32 MHz 1 1 1 — 10-CH, 12-bit 6-CH, 8-bit — — 8-CH, 16-bit — 9 64-pin LQFP, 48-pin QFN 9S12P32 32 KB Yes 2 KB 4 KB 49 32 MHz 1 1 1 — 10-CH, 12-bit 6-CH, 8-bit — — 8-CH, 16-bit — 9 64-pin LQFP, 48-pin QFN HCS12 Family (Sheet 1 of 2) Product Flash ROM RAM EEPROM I/O Frequency CAN SCI SPI IIC ADC PWM Motor SSD Timer LCD KWU Package Options In Production S12H Family—Instrument Cluster 3S12HZ256 — 256 KB 12 KB — 85 25MHz 2 2 1 1 16-CH, 10-bit 6-CH, 8-bit 16/4 4 8-CH, 8-bit 32x4 8 112-pin LQFP Yes 9S12HZ128 128 KB — 6 KB 2 KB 85 25MHz 2 2 1 1 16-CH, 10-bit 6-CH, 8-bit 16/4 4 8-CH, 8-bit 32x4 8 112-pin LQFP Yes 3S12HZ128 — 128 KB 6 KB — 85 25MHz 1 2 1 1 16-CH, 10-bit 6-CH, 8-bit 16/4 4 8-CH, 8-bit 32x4 8 112-pin LQFP Yes 9S12HZ64 64 KB — 4 KB 1 KB 69 25MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit 16/4 4 8-CH, 8-bit 24x4 8 80-pin QFP, 112-pin LQFP Yes 3S12HZ64 — 64 KB 4 KB — 69 25MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit 16/4 4 8-CH, 8-bit 24x4 8 80-pin QFP, 112-pin LQFP Yes 9S12HN64 64 KB — 4 KB 1 KB 69 25MHz — 1 1 — 8-CH, 10-bit 4-CH, 8-bit 16/4 4 8-CH, 8-bit 24x4 8 80-pin QFP, 112-pin LQFP Yes 3S12HN64 — 64 KB 4 KB — 69 25MHz — 1 1 — 8-CH, 10-bit 4-CH, 8-bit 16/4 4 8-CH, 8-bit 20x4 8 80-pin QFP, 112-pin LQFP Yes 3S12HZ32 — 32 KB 2 KB — 59 25MHz 1 1 — — 7-CH, 10-bit 4-CH, 8-bit 16/4 4 4-CH, 8-bit 20x4 7 80-pin QFP Yes 3S12HN32 — 32 KB 2 KB — 59 25MHz — 1 — — 7-CH, 10-bit 4-CH, 8-bit 16/4 4 4-CH, 8-bit 20x4 7 80-pin QFP Yes S12C Family—Low Cost CAN Nodes, LIN Master, Powertrain Watchdog 9S12C128 128 KB — 4 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12C128 — 128 KB 4 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 9S12C96 96 KB — 4 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12C96 — 96 KB 4 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 9S12C64 64 KB — 4 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12C64 — 64 KB 4 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 9S12C32 32 KB — 2 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12C32 — 32 KB 2 KB — 60 16-25 MHz 1 1 1 — 8-CH, 10-bit 6-CH, 8-bit — — 8-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP A change bar appears in the left margin to mark the location of new or revised information. SG187–17 Rev 29

HCS12 Family (Sheet 2 of 2) Product Flash ROM RAM EEPROM I/O Frequency CAN SCI SPI IIC ADC PWM Motor SSD Timer LCD KWU Package Options In Production S12Q Family—Reduced Feature Set Extension of S12C Family 9S12Q128 128 KB — 4 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12Q128 — 128 KB 4 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 9S12Q96 96 KB — 3 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12Q96 — 96 KB 3 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 9S12Q64 64 KB — 2 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12Q64 — 64 KB 2 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 9S12Q32 32 KB — 1 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP 3S12Q32 — 32 KB 1 KB — 60 8-16 MHz 1 1 1 — 8-CH, 10-bit 4-CH, 8-bit — — 6-CH, 16-bit — 12 48-pin LQFP, 52-pin LQFP, Yes 80-pin QFP S12R Family—ROM Alternative for High Volume, Low Cost Applications 3S12RG128 — 128 KB 8 KB — 91 16 - 25 MHz 2 2 2 1 2 x 16-CH, 10- 8-CH, 8-bit — — 8-CH, 16-bit — 22 80-pin QFP, 112-pin LQFP Yes bit 3S12RB128 — 128 KB 8 KB — 91 16 - 25 MHz 1 2 1 1 2 x 16-CH, 10- 8-CH, 8-bit — — 8-CH, 16-bit — 22 80-pin QFP, 112-pin LQFP Yes bit 3S12R64 — 64 KB 8 KB — 91 16 - 25 MHz 1 2 1 1 2 x 16-CH, 10- 8-CH, 8-bit — — 8-CH, 16-bit — 22 80-pin QFP, 112-pin LQFP Yes bit Note: specs given are for the largest package size stated. A change bar appears in the left margin to mark the location of new or revised information. SG187–18 Rev 29

THE FREESCALE SEMICONDUCTOR DIGITAL SIGNAL CONTROLLER (MCU/DSP) 56800E Core—The 56800E MCU+DSP core was architected specifically to provide users Service—A full-range of services is offered for the controller devices including software, the combined benefits of MCU ease of use together with DSP performance in a single core. support, training, and internal and third party development tools. 56F8300 High-Performance Flash Series—The MC56F8300 Series of controllers combines For additional information, visit: the 56800E core with flash memory, motor control peripherals, and built-in safety features Documentation, Tool, and Product Libraries: targeted specifically for automotive applications to provide 60MIPS of performance over the www.freescale.com full -40°C to 125°C temperature range. Automotive Home Page: Memory—On-board memory includes Program Flash and RAM, Data Flash and RAM, and www.freescale.com/automotive BootFlash with EEPROM emulation capability. The modified Harvard architecture enables users to perform up to three simultaneous memory accesses. 56F8xxx Family Product ROM RAM Flash Timer Serial GPIO A/D PWM Operating Operating Temperature Packaging Additional Information (KB) (pins) Voltage Frequency (V) (MHZ) 56F8013 0 4K 16K 4 x 16-bit 1 SCI/LIN + 1 SPI + 1 I2C 26 1 x 4-CH 1 x 6-CH 3.3 32 C, M 32-pin LQFP mcPWM with center alignment, 12-bit 1 x 4 channel Quad Decoder 56F8355 n/a 20K 280K 16 x 16-bit 2 SCI/LIN + 2 SPI + 1 CAN + 1 I2C 49 4 x 4-CH 2 x 6-CH 3.3 60 C, M 128-pin LQFP mcPWM with center alignment, 12-bit 2 x 4 channel Quad Decoder FREESCALE SEMICONDUCTOR LOCAL INTERCONNECT NETWORK (LIN) SOLUTIONS Freescale Semiconductor and LIN—As the only semiconductor member of the LIN Advanced Integration with LIN—Microcontrollers will evolve in the LIN environment to consortium, Freescale Semiconductor has the industry’s most advanced range of integrate the voltage regulator, physical interface, and high-voltage I/O to provide space, components, software, tools, and support available. cost, and reliability benefits. Freescale Semiconductor solutions provide this capability today. Cost Benefits from LIN—A LIN sub-bus system uses a single-wire implementation and self- Software for LIN—Freescale Semiconductor is working closely with the leading LIN tool synchronization, without a crystal or ceramic resonator, in the slave node. With these cost supplier to ensure a first class, seamless development and debug environment for Freescale benefits, high-end comfort and convenience features no longer need to be limited only to Semiconductor LIN products. top-of-the-line cars. For additional information, visit: Embedded Controllers—Since the LIN sub-bus is based on common UART/SCI interface Local Interconnect Network (LIN) Home Page hardware, the 8-bit 68HC08, and 16-bit S12 and S12X Families provide the industry’s www.lin-subbus.org broadest range of performance and features, affording designers the freedom to choose parts ideally suited to their needs. Automotive Home Page freescale.com/automotive LIN Software Products Product 68HC05 68HC08 S08 S12 S12X LIN master n/a Available Available Available Available LIN slave Available Available Available Available Available Operating system n/a Available Available Available Available LIN Physical Interface Product Description Main Characteristics Bus Type Protection Operating Current Limitation Other Control and Packaging Status and Standard Features Voltage Standby Features Status (V) (µA) Reporting Typ Max MC33399 Local Interconnect Network LIN LIN: local interconnect network physical interface LIN single wire Current limitation, 7.0 to 27 n/a 50 Wake up input pin, control of Parallel 8-pin SOICN Production Physical Layer thermal protection external voltage regulator Communication EVB MC33661 eLIN - enhanced LIN Physical layer Selectable slew rate for operations at 10, 20, 100 LIN single wire Current and ther- 5.5 to 27 8.0 20 Compatibility with 5.0 V and Parallel 8-pin SOICN Production (Local Interconnect Network) kbps; Bus short to ground fail safe; Excellent EMC mal protection 3.3 V micros. Wake up input Communication EVB behavior; Pin and function compatible with MC33399 Control of external regulator SG187–19 Rev 29

THE FREESCALE SEMICONDUCTOR POWER ARCHITECTURE™ ISA MICROCONTROLLER FAMILY Building on the award-winning design of its MPC5xx family, Freescale Semiconductor has The MPC55xx portfolio will continue to grow with devices that proliferate with derivatives introduced an advanced line of 32-bit microcontrollers to the mass market: the MPC55xx that will offer expanded sets of memory, connectivity and performance options. Family. Based on Power Architecture™ technology and system-on-chip (SoC) design, the For additional information, visit: 32-bit MPC55xx family microcontrollers offer advanced features that help make cars safer and more fuel efficient while reducing harmful emissions. The MPC55xx MCUs target a Documentation, Tool, and Product Libraries broad range of automotive applications, including powertrain control, advanced safety, www.freescale.com driver assistance, chassis and body electronics. Automotive Home Page The MPC55xx family consists of an array of package options for systems performance www.freescale.com/automotive needs and embedded Flash requirements. Offering pin-compatibility throughout the entire Flash-based family, engineers are given the ability to migrate their efforts from one design to another, reducing development costs and improving time to market. To assist in developing products, the MPC55xx family offers systems solutions that include application software, development tools, training, documentation and technical support. Power Architecture ISA Microcontroller Family MPC55XX (eSys) Family Device Core Program SRAM DMA EEPROM eSCI DSPI CAN IIC FlexRay Ethernet MLB External Nexus ETPU eMIOS PIT GPIO ADC Voltage Temp Frequency Package In Market Focus Platform Flash (100BaseT) Bus Range Range Options Production MPC5533 Power 768 KB 48 KB 32 CH Emulated 1 2 2 — — Yes 3 32-CH — — 192 40-CH, 3.3 V, M 40 - 80 208 MAPBGA, Yes Engine e200z3 in program 1x 5V MHz 324 PBGA Management Flash 12-bit MPC5534 Power 1 MB 64 KB 32 CH Emulated 2 3 2 — — Yes 3 32-CH 24-CH, — 192 40-CH, 3.3 V, M 40 - 80 208 MAPBGA, Yes Engine e200z3 in program 24-bit 1x 5V MHz 324 PBGA Management Flash 12-bit MPC5553 Power 1.5 MB 64 KB 32 CH Emulated 2 3 2 — Yes — Yes 3 32-CH 24-CH, — 220 40-CH, 3.3 V, M 80 - 132 208 MAPBGA, Yes Engine e200z6 in program 24-bit 1x 5V MHz 324 PBGA, Management Flash 12-bit 416 PBGA MPC5554 Power 2 MB 64 KB 64 CH Emulated 2 4 3 — — Yes 3 2 x 24-CH, — 256 40-CH, 3.3 V, M 80 - 132 416 PBGA Yes Engine e200z6 in program 32-CH 24-bit 1x 5V MHz Management Flash 12-bit MPC5561 Power 1 MB 192 KB 32 CH Emulated 4 2 2 — Yes — Yes 3 — 24-CH, — 150 40-CH, 3.3 V, C, M 80 - 132 324 PBGA Advanced e200z6 in program 24-bit 1x 5V MHz Driver Flash 12-bit Assistance MPC5565 Power 2 MB 80 KB 32 CH Emulated 2 3 3 — — Yes 3 32-CH 24-CH, — 192 40-CH, 3.3 V, M 80 - 132 324 PBGA Yes Engine e200z6 in program 24-bit 1x 5V MHz Management Flash 12-bit MPC5566 Power 3 MB 128 KB 64 CH Emulated 2 4 4 — Yes — Yes 3 2 x 24-CH, — 256 40-CH, 3.3 V, C, M 80 - 132 416 PBGA Yes Engine e200z6 in program 32-CH 24-bit 1x 5V MHz Management Flash 12-bit MPC5567 Power 2MB 80 KB 32 CH Emulated 2 3 5 — Yes Yes emulated Yes 3 32-CH 24-CH, — 238 40-CH, 3.3 V, C, M 80 - 132 324 PBGA, Yes Engine e200z6 in program via eTPU 24-bit 1x 5V MHz 416 PBGA Management Flash 12-bit MPC5516G Power 1 MB 64 KB 16 CH Emulated 8 3 6 1 Yes emulated Yes 2+ — 24-CH, 8-CH, 111, 40-CH, 5V C, V, M 48 - 80 144 LQFP, Central Body, e200z + in program via z0 16-bit 32-bit 144 1x MHz 208 MAPBGA Gateway e200z0 Flash 12-bit MPC5516E Power 1 MB 64 KB 16 CH Emulated 6 3 5 1 emulated Yes 2+ — 24-CH, 8-CH, 111, 40-CH, 5V C, V, M 48 - 66 144 LQFP, Central Body, e200z + in program via z0 16-bit 32-bit 144 12-bit MHz 208 MAPBGA Gateway e200z0 Flash MPC5516S Power 1 MB 48 KB 16 CH Emulated 6 3 5 1 — 2+ — 24-CH, 8-CH, 111, 40-CH, 5V C, V, M 48 - 66 144 LQFP, Central Body e200z1 in program 16-bit 32-bit 144 12-bit MHz 208 MAPBGA Flash MPC5515S Power 768KB 32 KB 16 CH Emulated 6 3 5 1 — 2+ — 24-CH, 8-CH, 111, 40-CH, 5V C, V, M 48 - 66 144 LQFP, Central Body e200z1 in program 16-bit 32-bit 144 12-bit MHz 208 MAPBGA Flash A change bar appears in the left margin to mark the location of new or revised information. SG187–20 Rev 29

Power Architecture ISA Microcontroller Family (continued) MPC55XX (eSys) Family Device Core Program SRAM DMA EEPROM eSCI DSPI CAN IIC FlexRay Ethernet MLB External Nexus ETPU eMIOS PIT GPIO ADC Voltage Temp Frequency Package In Market Focus Platform Flash (100BaseT) Bus Range Range Options Production MPC5514G Power 512KB 64 KB 16 CH Emulated 8 3 6 1 P emulated Yes 2+ — 24-CH, 8-CH, 111, 40-CH, 5V C, V, M 48 - 80 144 LQFP, Central Body, e200z + in program via z0 16-bit 32-bit 144 1x MHz 208 MAPBGA Gateway e200z0 Flash 12-bit MPC5514E Power 512KB 32 KB 16 CH Emulated 6 3 5 1 emulated Yes 2+ — 24-CH, 8-CH, 111, 40-CH, 5V C, V, M 48 - 66 144 LQFP, Central Body, e200z + in program via z0 16-bit 32-bit 144 1x MHz 208 MAPBGA Gateway e200z0 Flash 12-bit Note: specs given are for the largest package size stated. MPC5xx Product Table Device Core Program SRAM eSCI DSPI CAN External Nexus ETPU eMIOS PIT GPIO ADC Voltage Temp Frequency Package In Market Platform Flash Bus Range Range Options Production Focus MPC555 Power 448 KB 26K RAM + 2 SCI 1 2x Yes — 2 TPU3 MIOS1 1-CH, up to 2 QADC (10-bit A/D with 3.3 Vdc for core, A, C, M 40 MHz 272-ball Yes Engine Architecture 6 for TPU QSPI TouCAN 2 x 16 CH 18 CH 16-bit 89 64 result registers each) 5.0 Vdc for flash PBGA Management RCPU 32 channels on chip MPC561 Power 0 32K RAM + 2 SCI 1 3x Yes NEXUS 2 TPU3 MIOS14 1-CH, up to 2 QADC (10-bit A/D with 2.6 Vdc for core, C, M 40 MHz or 388-ball Yes Engine Architecture 8 for TPU + QSPI TouCAN debug port 2 x 16 CH 22 CH 16-bit 89 64 result registers each) 5.0 Vdc for A/D 56 MHz PBGA Management RCPU 2 for DCRAM (class 3) 32 channels on chip and I/O MPC562 Power 0 32K RAM + 2 SCI 1 3x Yes NEXUS 2 TPU3 MIOS14 1-CH, up to 2 QADC (10-bit A/D with 2.6 Vdc for core, C, M 40 MHz or 388-ball Yes Engine Architecture 8 for TPU + QSPI TouCAN debug port 2 x 16 CH 22 CH 16-bit 89 64 result registers each) 5.0 Vdc for A/D 56 MHz PBGA Management RCPU 2 for DCRAM (class 3) 32 channels on chip and I/O MPC563 Power 512 KB 32K RAM + 2 SCI 1 3x Yes NEXUS 2 TPU3 MIOS14 1-CH, up to 2 QADC (10-bit A/D with 2.6 Vdc for core, C, M 40 MHz or 388-ball Yes Engine Architecture 8 for TPU + QSPI TouCAN debug port 2 x 16 CH 22 CH 16-bit 89 64 result registers each) 5.0 Vdc for A/D 56 MHz PBGA Management RCPU 2 for DCRAM (class 3) 32 channels on chip and I/O MPC564 Power 512 KB 36K RAM + 2 SCI 1 3x Yes NEXUS 2 TPU3 MIOS14 1-CH, up to 2 QADC (10-bit A/D with 2.6 Vdc for core, C, M 40 MHz or 388-ball Yes Engine Architecture 8 for TPU + QSPI TouCAN debug port 2 x 16 CH 22 CH 16-bit 89 64 result registers each) 5.0 Vdc for A/D 56 MHz PBGA Management RCPU 2 for DCRAM (class 3) 32 channels on chip and I/O MPC565 Power 1 MB 36K RAM + 4 SCI 2 3x Yes NEXUS 3 TPU3 MIOS14 1-CH, up to 2 QADC (10-bit A/D with 2.6 Vdc for core, C, M 40 MHz or 388-ball Yes Engine Architecture 10 for TPU + QSPI TouCAN debug port 2 x 16 CH 22 CH + 16-bit 98 64 result registers each) 5.0 Vdc for A/D 56 MHz PBGA Management RCPU 4 for DCRAM +1 (class 3) RTC 40 channels on chip and I/O J1850 MPC566 Power 1 MB 36K RAM + 4 SCI 2 3x Yes NEXUS 3 TPU3 MIOS14 1-CH, up to 2 QADC (10-bit A/D with 2.6 Vdc for core, A, C, M 40 MHz or 388-ball Yes Engine Architecture 10 for TPU + QSPI TouCAN debug port 2 x 16 CH 22 CH + 16-bit 98 64 result registers each) 5.0 Vdc for A/D 56 MHz PBGA Management RCPU 4 for DCRAM +1 (class 3) RTC 40 channels on chip and I/O J1850 MPC5200 Product Table Product Processor Dhrystone Cache L1 Product Integrated Memory Other Serial Interfaces GPIO DMA Core Operating Ambient Ambient Temp Packaging Speed (Typ) Performance Inst/Data (KB) Integration Controller Peripherals Controller Voltage Temp Max Min (MIPS) MPC5200B 266, 400 MHz 500 @ 266 MHz/ 16/16 ATA/IDE SDRAM FPU 10/100 Ethernet Up to 56 BestComm 1.5 70°C to 0°C to -40°C 272-ball PBGA 760 @ 400 MHz PCI 2.2 DDR MMU USB 1.1 Host (up to 2) 16 CH 85°C Local SRAM/ SDRAM BestComm DMA UART (up to 6) RAM/Flash SPI (up to 5) Controller I2C (up to 2) I2S (up to 3) CODEC (up to 3) AC97 (up to 2) CAN 2.0 A/B (up to 2) J1850/BLDC-D (1) A change bar appears in the left margin to mark the location of new or revised information. SG187–21 Rev 29

THE FREESCALE SEMICONDUCTOR MAC71XX FAMILY MAC71xx—The MAC71xx family of microcontrollers (MCUs) is a pin-compatible family of • Powerful eMIOS timer system with unified programmable channels that can be config- 32-bit Flash memory-based devices developed specifically for embedded automotive ured as input capture, output compare or PWM applications. It addresses the growing demand for cost-effective 32-bit performance • Enhanced SCI and LIN master operation to significantly reduce enhancements as traditional body, chassis and safety application exceed the performance interrupts to the core scope of many 16-bit offerings. • Enhanced Nexus Class 2+ debug interface providing real-time All MAC71xx Family members are composed of a 32-bit central processing unit (the instruction trace ARM7TDMI-S™ core), up to 1MB of embedded Flash EEPROM for program storage, up to • Optional data Flash providing effective EEPROM emulation 32 KB of embedded Flash for data and/or program storage, and up to 48 KB of RAM. The MAC71xx Family members are the first 32-bit MCUs from Freescale based on the ARM7™ • Dual analog to digital converter option core available to the automotive market. This family implements many features from the • Multiple FlexCAN and enhanced serial communication and peripheral interfaces MPC5500 Family with which our automotive customers are already familiar. • External bus interface option Standard Platform Architecture—The MAC71xx Family, based on a standard platform • Multiple packaging options architecture, offers upward scalability with completely pin-compatible and software- • Multiple DSPI with fully programmable chip selects compatible products and a range of memory and peripheral options—allowing customers to easily transition to other devices in the MAC71xx Family, depending on their performance History in Flash—With Freescale's proven track record in delivering reliable Flash memory requirements. based on .25µ technology to the automotive market, the MAC71xx Family uses the same SST Flash that has already been shipped in volume production on the popular S12(X) family Compatibility—The MAC71xx Family allows 3.3 V to 5 V operation compatibility for existing of microcontrollers. peripheral devices (sensors), commonly used in many body applications today and expected in future 3.3 V applications. Tools, Service and Support—Standard tools designed for the ARM7TDMI core support the MAC71xx Family. MAC71xx Nexus debug tools are available from a variety of vendors. In Performance and Flexibility—Through the performance of the ARM7TDMI core and the addition, Freescale offers a full range of services to accompany all of its microcontrollers, advanced peripherals on the MAC71xx Family, Freescale Semiconductor is able to offer along with software solutions, support, and a wide range of low-cost development tools. automotive customers an attractive and competitive package to address performance concerns while operating at full automotive temperature range (-40°C to +125°C). Key For additional information visit: features include: Documentation, Tool, and Product Libraries • ARM7TDMI core achieving performance range up to 50 MHz (up to 45 Dhrystone www.freescale.com 2.1 MIPS) Automotive Home Page • Intelligent DMA infrastructure with 16 software assignable channels to help off load the www.freescale.com/automotive CPU from high interrupt loads MAC71XX FamilyNote Device Core Program SRAM DMA EEPROM eSCI DSPI CAN IIC External Nexus eMIOS PIT GPIO ADC Voltage Temp Frequency Package Options In Production Market Focus Platform Flash Bus Range Range MAC71x1 ARM7TDMI-S 512 KB 32 KB 16-CH 32 KB 4 2 4 1 Yes 2+ 16-CH 10-CH Up to Up to 3.3 V - 5 V C,V,M 40 - 50 112-pin LQFP, Yes Body, Chassis, 16-bit 24-bit 128 32-CH MHz 144-pin LQFP, Cluster 10-bit 208-lead MAPBGA MAC71x2 ARM7TDMI-S 256 KB 16 KB 16-CH 32 KB 3 2 2 1 2+ 16-CH 10-CH Up to 16-CH 3.3 V - 5 V C,V,M 40 - 50 112-pin LQFP, Yes Body, Chassis, 16-bit 24-bit 105 10-bit MHz 144-pin LQFP Cluster MAC71x6 ARM7TDMI-S 1 MB 48 KB 16-CH 32 KB 4 2 4 1 Yes 2+ 16-CH 10-CH Up to Up to 3.3 V - 5 V C,V 40 - 50 112-pin LQFP, Yes Body, Chassis, 16-bit 24-bit 128 32-CH MHz 144-pin LQFP, Cluster 10-bit 208-lead MAPBGA Note: Specs given are for the largest package size stated. SG187–22 Rev 29

THE FREESCALE SEMICONDUCTOR MAC72XX FAMILY Designed for automotive applications, MAC72xx devices comprise a family of 32-bit CAN-compatible modules (FlexCAN). The inclusion of an on-chip oscillator (OSC) and Flash-based microcontrollers. The MAC72xx family’s pin compatibility enables users to phase-locked loop clock and reset generator (CRG) allows power consumption and choose between different memory and peripheral options for scalable designs. All devices performance to be adjusted to suit operational requirements. All module pins, with the are composed of a 32-bit central processing unit (ARM7TDMI-S™), and an enhanced direct exception of the ATD and CLKOUT pins, can be configured as bi-directional ports, and the memory Access (eDMA) controller combined with a cross-bar bus switch (XBS) to support devices provide several dedicated general purpose input/output port pins. All port pins can efficient transfers between embedded Flash EEPROM memory, system RAM, provide interrupt capability. The operating frequency maximum is 70 MHz across a range of on-chip peripherals and, optionally, external devices via an external bus interface (EBI). The -40°C to 150°C junction temperature. Devices are offered in 80-pin LQFP, 100-pin LQFP, Flash memory is partitioned into large blocks suitable for program storage, and smaller blocks 112-pin LQFP and 144-pin LQFP packages. suitable for EEPROM emulation, such that the best fit may be chosen for each application. For additional information visit: One block is defined as a Shadow Block, intended as program storage available in Bootloader and Secure Bootloader modes. Documentation, Tool, and Product Libraries www.freescale.com The peripheral set includes asynchronous serial communications interfaces (eSCI), serial peripheral interfaces (DSPI), an I2C-bus interface, a configurable 16-bit timer subsystem Automotive Home Page (eMIOS) for functions such as dual action capture/compare and output pulse width www.freescale.com/automotive modulation, a multi-channel 10/12-bit analog-to-digital converter (ATD), and MAC72XX Family Device Core Platform Program SRAM DMA EEPROM eSCI DSPI CAN IIC External Nexus eMIOS PIT GPIO ADC Voltage Temp Frequency Package In Market Flash Bus Range Range Options Production Focus MAC72x2 ARM7TDMI-S 256 KB 20 KB 16-CH 64 KB 2 3 2 1 Yes 3 8-CH, 10-CH, 32-bit Up to Up to 5V C, V, M 50 - 70 100-pin LQFP, Yes Safety Data Flash 16-bit RTI 24-bit 102 16-CH, MHz 144-pin LQFP (esp. Airbag) 12-bit MAC72x1 ARM7TDMI-S 448 KB 32 KB 16-CH 64 KB 2 3 2 1 Yes 3 16-CH, 10-CH, 32-bit Up to Up to 5V C, V, M 50 - 70 100-pin LQFP, Yes Safety Data Flash 16-bit RTI 24-bit 102 16-CH, MHz 144-pin LQFP (esp. Airbag) 12-bit Note: Specs given are for the largest package size stated. SG187–23 Rev 29

QFN — Quad Flat No-Lead Package — Pb-free — — Definitions — QFP — Quad Flat Package AA — Pb-free 44 to 100 pin QFP ADC — Analog-to-Digital Converter QSM — Queued Serial Module (SCI + QSPI) AB — Pb-free 112 to 288 pin QFP ASK — Amplitude Shift Keying Modulation QSPI — Queued SPI AC — Pb-free 16 to 44 pin LQFP BDM — Background Debug Mode RTI — Real-Time Interrupt AE — Pb-free 48 to 64 pin LQFP CAN — Controller Area Network SCI — Serial Communication Interface AF — Pb-free 68 to 100 pin LQFP CDIP — Ceramic Dual In-Line Package SCIE — Enhanced SCI AG — Pb-free 108 to 144 pin LQFb CLCC — Ceramic Leaded Chip Carrier SCIM — Single-Chip Integration Module AH — Pb-free 80 to 100 pin TQFP COP — Computer Operating Properly (Watchdog Timer) SDIP — Shrink Dual In-line Package AI — Pb-free FQFP CPU16 — 16-bit Central Processor Unit (HC11 Compatible) SIM — System Integration Module AJ — Pb-free CQFP CPU32 — 32-bit Central Processor Unit (68000 Compatible) SIML — Low-Power System Integration Module AE — Pb-free 22 to 64 pin PDIP CTM — Configurable Timer Module (Various Hardware Options) SIOP — Simple Serial I/O Port ED — Pb-free 6 yo 20 pin PDIP DAB — Digital Audio Broadcasting SOICN — Small Outline Package Narrow Body EE — Pb-free PSDIP DIP — Dual In-line Package SOICW — Small Outline Package Wide Body EF — Pb-free 8 to 16 in SOIC DSPI — Deserial Peripheral Interface SPI — Serial Peripheral Interface EG — Pb-free 16 to 28 pin SOIC WIDE EBI — External Bus Interface ESPI — Enhanced SPI EH — Pb-free 132 pin PQFP ECT — Enhanced Capture Timer SRAM — Standby RAM Module EI — Pb-free PLCC eDMA — Enhanced Direct Memory Access Controller SSOP — Shrink Small Outline Package EJ — Pb-free 8 to 24 pin TSSOP eTPU — Enhanced Timing Processor Unit TPU — Time Processor Unit (16 Programmable Channels) EK — Pb-free 32 to 54 pin SOIC WIDE eMIOS — Enhanced Modular Input Output System TPURAM — Standby RAM Module with TPU Emulation Capability EL — Pb-free 26 to 56 pin TSSOP eQADC — Enhanced Queued Analog-to-Digital Converter TQFP — Thin Quad Flat Package (1.0mm thick) EN — Pb-free 8 to 24 pin SSOP eSCI — Enhanced Serial Communications Interface TSSOP — Thin Shrink Small Outline Package EO — Pb-free 26 to 56 pin SSOP FSK — Frequency Shift Keying Modulation UART — Universal Asynchronous Receiver/Transmitter EP — Pb-free QFN & MLF (Exposed Pad) GPT — General-Purpose Timer Module (4 IC, 5 OC, 2 PWM) USB — Universal Serial Bus ER — Pb-free CATV HQFP — Heatsink Quad Flat Package — Package Designators — ES — Pb-free SENSOR HSOP — Heatsink Small Outline Package B — Shrink DIP (70 mil spacing) ET — Pb-free RF (POWER CHIPS) i — Input-Only Port Pins DW — Small Outline (Wide-Body SOIC) EU — Pb-free MAC PAAC i/o — Bidirectional Input and Output Port Pins DWB — Small Outline (Wide body SDIB) 0.65 pitch EV — Pb-free MFP (SOEIAJ) I2C — Inter-Integrated Circuit FA — 7 x 7 mm Quad Flat Pack (QFP) FC — Pb-free QFN & MLF (Regular) IC — Input Capture FB — 10 x 10 mm Quad Flat Pack (QFP) FE — Pb-free CerQuads ISPI — Interval Serial Peripheral Interface FC — QFN Quad Flat Pack VK — Pb-free MAPBGA <=1.3mm (THINMAP) <.7mm Pitch LQFP — Low-Profile Quad Flat Package (1.4mm thick) FE — CQFP (windowed) — Samples Only VL — Pb-free MAPBGA <=1.3mm (THINMAP) >.7mm Pitch LVI — Low-Voltage Interrupt FN — Plastic Quad (PLCC) VM — Pb-free MAPBGA 1.6mm > .7mm Pitch LVR — Low-Voltage Reset FS — CLCC (windowed) — Samples Only VN — Pb-free MAPBGA 1.6mm < .7mm Pitch MCCI — Multi-Channel Communication Interface (2 SCI, SPI) FT — 28 x 28 mm Quad Flat Pack (QFP) VO — Pb-free MAPBGA 1.35mm < .7mm Pitch MFT — Multi-Function Timer FU — 14 x 14 mm Quad Flat Pack (QFP) VP — Pb-free MAPBGA 1.36mm > .7mm Pitch MUX — Multiplexed FZ — CQFP (windowed) — Samples Only VR — Pb-free PBGA OC — Output Compare K — Cerdip (windowed) — Samples Only VS — Pb-free FC-HiTCE LGA (without C5 sphere) OOK — On-Off Keying L — Ceramic Sidebraze VT — Pb-free FC PBGA PBGA — Plastic Ball Grid Array P — Dual in-Line Plastic VU — Pb-free FC-HiTCE PDIP — Plastic Dual In-Line Package PNA — PQFN Power QFN VV — Pb-free TBGA PEEP — Personality EEPROM PNB — PQFN Power QFN VW — Pb-free HSOP PEP — Personality EPROM PNC — PQFN Power QFN VX — Pb-free SMT PLCC — Plastic Leaded Chip Carrier PU — 14 x 14 mm Low-Profile Quad Flat Pack (LQFP) VY — Pb-free UNIBODY PLL — Phase-Locked Loop PV — 20 x 20 mm Low-Profile Quad Flat Pack (LQFP) PQFP — Plastic Quad Flat Pack S — Cerdip (windowed) — Samples Only PWM — Pulse-Width Modulation TM — Mechatronics Connector QADC — Queued Analog-to-Digital Converter (10-bit) VR — Plastic Ball Grid Array (PBGA) with PB-free solder balls PQFN — Quad Flat No-Lead Package ZP — 27 x 27 mm Plastic Ball Grid Array (PBGA) SG187–24 Rev 29

Product Numbering System for Microcontrollers MC 68HC 908 JK3 X XX QUALIFICATION STATUS PACKAGING DESIGNATOR MC FULLY QUALIFIED PRODUCTION XC INITIAL PRODUCTION QUALIFICATION, NOT FULLY CHARACTERIZED TEMPERATURE RANGE PC PRE-QUALIFICATION – ENGINEERING SAMPLES ONLY C -40°C TO 85°C CORE V -40°C TO 105°C M -40°C TO 125°C 0x ROM 70x OTP FAMILY 80x EEPROM 90x FLASH Product Numbering System for HCS12 MC 9 S12 Dx 256 X XX QUALIFICATION STATUS PACKAGE MC FULLY QUALIFIED CORE XC INITIAL PRODUCTION PC PRE-QUALIFICATION TEMPERATURE RANGE C -40°C TO 85°C 9 FLASH V -40°C TO 105°C FLASH SIZE M -40°C TO 125°C FAMILY SG187–25 Rev 29

Product Numbering System for MPC5xx MPC 5xx L F M ZP 40 BUS SPEED PACKAGE TYPE QUALIFICATION STATUS PPC ENGINEERING SAMPLES TEMPERATURE RANGE XPC PILOT PRODUCTION A -55°C TO +125°C MPC FULL SPEC QUALIFIED MEMORY TYPE C -40°C TO 85°C PRODUCT BLANK NONE V -40°C TO 105°C F FLASH M -40°C TO 125°C PRODUCT DESIGNATOR TPU MASK 500 – 599 BLANK L TPU2 A/G COMBO Product Numbering System for MC56F8300 Series MC 56F83 XX M XX 60 QUALIFICATION STATUS BUS SPEED PC PRE-QUALIFICATION, ENGINEERING SAMPLES PACKAGE TYPE MC FULLY QUALIFIED TEMPERATURE RANGE PRODUCT DESIGNATOR V -40°C TO 105°C AUTOMOTIVE CONTROLLER M -40°C TO 125°C SERIES WITH FLASH SG187–26 Rev 29

Product Numbering System for MPC55xx MPC 55xx M VR 132 R2 TAPE AND REEL STATUS OF PRODUCT: MPC FULLY QUALIFIED SPC FULLY QUALIFIED AVAIL SPEED FOR AUTO CUSTOMERS PPC PRODUCT ENGINEERING PACKAGE DEISGNATOR TEMPERATURE RANGE PRODUCT DESIGNATOR C -40°C TO 85°C V -40°C TO 105°C M -40°C TO 125°C Product Numbering System for Pressure Sensors M PX A 2 XXX A P X T1 PRODUCT CATEGORY SHIPPING METHOD M QUALIFIED STANDARD NONE TRAYS S CUSTOM PRODUCT T1 TAPE AND REEL PRESSURE SENSORS LEADFORM OPTION P, X PROTOTYPE PRODUCT U RAIL 0 OPEN PACKAGING TYPE 1–2 CONSULT FACTORY NONE UNIBODY 3–5 OPEN A/V SMALL OUTLINE PACKAGE 6–7 SOP* ONLY AZ/VZ SMALL OUTLINE MEDIA RESISTANT PACKAGE PORTING STYLE H SUPER SMALL OUTLINE PACKAGE HZ SUPER SMALL OUTLINE C AXIAL PORT (SMALL OUTLINE PACKAGE) MEDIA RESISTANT PACKAGE P PORTED (UNIBODY) M M-PAK P SINGLE PORT PRODUCT TYPE Y SUPER SMALL OUTLINE PACKAGE (TPM) Dp DIFFERENTIAL PORT A ABSOLUTE PRODUCT FEATURES G GAUGE S STOVEPIPE PORT (UNIBODY) D DIFFERENTIAL SX AXIAL PORT (UNIBODY) NONE UNCOMPENSATED 2 TEMPERATURE COMPENSATED/CALIBRATED V VACUUM/GAUGE W ROBUST AXIAL PORT 3 OPEN 4 TEMPERATURE COMPENSATED/CALIBRATED/ MAXIMUM PRESSURE IN kPa SIGNAL CONDITIONED AUTOMOTIVE ACCURACY EXCEPT FOR MPX2300 EXPRESSED IN mmHg 5 TEMPERATURE COMPENSATED/CALIBRATED/ SIGNAL CONDITIONED 6 HIGH TEMPERATURE 7 POSITIVE/NEGATIVE PRESSURE 8 CMOS SG187–27 Rev 29

Product Numbering System for ARM MAC 7 1 x x C FV 50 xx STATUS OF PRODUCT: MAC FULLY QUALIFIED EXTRA PACKAGE SAC FULLY QUALIFIED AVAIL DESIGNATORS FOR AUTO CUSTOMERS PAC PRODUCT ENGINEERING BUS SPEED CORE PACKAGE TYPE GENERATION (FAMILY) FU 100 LQFP PV 112/144 LQFP PINOUT/PACKAGE VF 208 MAP BGA OPTION DESIGNATOR TEMPERATURE RANGE SEQUENTIAL DEVICE C -40°C TO 85°C NUMBER V -40°C TO 105°C M -40°C TO 125°C Product Numbering System for Analog MCx tt xxx r v PPP RR PRODUCT CATEGORY TEMPERATURE RANGE CORE/TARGET REVISION VARIATION PACKAGING TAPE AND REEL MC - QUALIFIED STANDARD 33 = -40°C TO > +105°C - 125°C (default blank) (default blank) DESIGNATOR INDICATOR SC - CUSTOM DEVICE 34 = 0°C -40°C TO +70°C - 105°C PC - PROTOTYPE DEVICE xxZ - ENVIRONMENTAL PKG (Optional) (SOIC only) 34A = -40°C TO 105°C 34B = -40°C TO 85°C 34C = -40°C TO 70°C 35 = -55°C TO > +125°C MPC xxxxx r PPP RR PRODUCT CATEGORY CORE/TARGET REVISION PACKAGING TAPE AND REEL M - QUALIFIED STANDARD (default blank) DESIGNATOR INDICATOR S - CUSTOM DEVICE P - PROTOTYPE DEVICE SG187–28 Rev 29

Product Numbering System for Analog eXTREME Switch MC rd XS g o xx r PPP RR PRODUCT CATEGORY RDSon FAMILY GENERATION # OF OUTPUTS XX ANALOG REVISION PACKAGING TAPE AND REEL MC - QUALIFIED STANDARD 10 = 10 Ohm XS = eXTREME SWITCH 3 = Gen 3 2 = DUAL CORE/TARGET (default blank) DESIGNATOR INDICATOR SC - CUSTOM DEVICE 15 = 15 Ohm 4 = QUAD PC - PROTOTYPE DEVICE 35 = 35 Ohm Product Numbering System for Analog Embedded MCU and Power MM 9 08 F xxx r t PPP RR PRODUCT CATEGORY 9 = FLASH, OT CORE A = 1K Xxx ANALOG REVISION TEMPERATURE RANGE PACKAGING TAPE AND REEL MM - QUALIFIED STANDARD BLANK = ROM 08 = HC08 B = 2K CORE/TARGET (default blank) I = 0°C TO 85°C DESIGNATOR INDICATOR SM - CUSTOM STANDARD C = 4K C = -40°C TO 85°C PM - PROTOTYPE DEVICE D = 8K V = -40°C TO 105°C E = 16K M= -40°C TO 125°C SG187–29 Rev 29

Notes SG187–30 Rev 29

Notes SG187–31 Rev 29

How to Reach Us: Home Page: Asia/Pacific: Information in this document is provided solely to enable system and Freescale Semiconductor Hong Kong Ltd. software implementers to use Freescale Semiconductor products. There www.freescale.com Technical Information Center are no express or implied copyright licenses granted hereunder to design 2 Dai King Street or fabricate any integrated circuits or integrated circuits based on the Web Support: Tai Po Industrial Estate information in this document. Tai Po, N.T., Hong Kong http://www.freescale.com/support +800 2666 8080 support.asia@freescale.com Freescale Semiconductor reserves the right to make changes without USA/Europe or Locations Not Listed: further notice to any products herein. Freescale Semiconductor makes no Freescale Semiconductor, Inc. For Literature Requests Only: warranty, representation or guarantee regarding the suitability of its Technical Information Center, EL516 Freescale Semiconductor Literature Distribution Center products for any particular purpose, nor does Freescale Semiconductor 2100 East Elliot Road P.O. Box 5405 assume any liability arising out of the application or use of any product or Tempe, Arizona 85284 Denver, Colorado 80217 circuit, and specifically disclaims any and all liability, including without +1-800-521-6274 or +1-480-768-2130 1-800-441-2447 or 303-675-2140 limitation consequential or incidental damages. “Typical” parameters that www.freescale.com/support Fax: 303-675-2150 may be provided in Freescale Semiconductor data sheets and/or LDCForFreescaleSemiconductor@hibbertgroup.com specifications can and do vary in different applications and actual Europe, Middle East, and Africa: performance may vary over time. All operating parameters, including Freescale Halbleiter Deutschland GmbH “Typicals”, must be validated for each customer application by customer’s Technical Information Center technical experts. Freescale Semiconductor does not convey any license Schatzbogen 7 under its patent rights nor the rights of others. Freescale Semiconductor 81829 Muenchen, Germany products are not designed, intended, or authorized for use as components +44 1296 380 456 (English) in systems intended for surgical implant into the body, or other applications +46 8 52200080 (English) intended to support or sustain life, or for any other application in which the +49 89 92103 559 (German) failure of the Freescale Semiconductor product could create a situation +33 1 69 35 48 48 (French) where personal injury or death may occur. Should Buyer purchase or use www.freescale.com/support Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Japan: Semiconductor and its officers, employees, subsidiaries, affiliates, and Freescale Semiconductor Japan Ltd. distributors harmless against all claims, costs, damages, and expenses, Headquarters and reasonable attorney fees arising out of, directly or indirectly, any claim ARCO Tower 15F of personal injury or death associated with such unintended or unauthorized 1-8-1, Shimo-Meguro, Meguro-ku, use, even if such claim alleges that Freescale Semiconductor was negligent Tokyo 153-0064 regarding the design or manufacture of the part. Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007. All rights reserved. SG187Q42007 Rev 29 10/2007