Analog and Mixed Signal Power Management Quarter 4, 2007 SG1002Q42007 Rev 0 Analog and Mixed Signal Power Actuation Network Transceivers Signal Conditioning System Basis Chip Embedded MCU + Power Power Management Linear Regulator Switching Regulator Power over Ethernet Access and Remote ControlFREESCALE SEMICONDUCTOR ANALOG AND MIXED SIGNAL PRODUCTS The product categories range from Power Actuation and Network Transceivers to Signal Benefits—Freescale Semiconductor SMARTMOS technology brings a wide range of Conditioning and Embedded MCU + Power. Power Actuation covers a broad range of load benefits to today’s designs, including component reductions, power flexibility, durability, control and drivers, including motor control. efficiency, precision, high-performance analog, and robustness. SMARTMOS™—Freescale Semiconductor SMARTMOS technology allows designers to Packaging - Freescale devices may be offered in EPP and RoHS compliant packages; view interface high-precision components with the harsh automotive environment. the external web for specifics. Cost-Effective—Ideally suited for rugged automotive applications, SMARTMOS solutions For additional information, visit: offer a cost-effective blend of analog, digital, and robust power silicon that enables Documentation, Tool, and Product Libraries integrated, mixed-signal, power control ICs. www.freescale.com Functionality—SMARTMOS solutions implement traditional analog functions with smaller www.freescale.com/analog die size, and a modular process produces components with the minimum number of www.freescale.com/powermanagement process steps for each circuit, minimizing overhead. ANALOG AND MIXED SIGNAL PRODUCTS Power Actuation — Low-Side Switches (Solid State Intelligent Switches) Product Description No of High-Side Continuous Current RDS(on) (mΩ) Current Current Limitation Control1 Status/Fault Protection Features Packaging Status Outputs or Low-Side Each Output (A) of Each Output Limitation (A) Standby Max (µA) Reporting MC33800 Engine Control IC, with Eight Low Side Switches, 8 L 0.35 700 6.0 30 Parallel, SPI Open Load detect, 54-pin SOICW Production Two Constant Current Low Side Switches and Six SPI Overcurrent protect, EVB MOSFET gate pre-drivers Overvoltage protect, Shorted Load detect, Undervoltage protect, Thermal protect MC33810 Engine Control Integrated Circuit capable of driving a 4 L 1.0 100 6.0 30 Parallel, SPI Status Shorted Load detect, 32-pin SOICW Production combination of four Low Side loads and four SPI Flags Thermal protect Exposed Pad 1Q2008 MOSFETs or IGBT gates MC33879 (1.0 Ω RDS(on)) Configurable Eight Output SPI 8 H/L 0.35 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, 32-pin SOICW Production Controlled Switch 2 PWM Temp Sense Exposed Pad MC33880 (1.0 Ω RDS(on)) Configurable Eight Output SPI 8 H/L 0.5 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, 32-pin SOICW Production Controlled Switch 2 PWM Temp Sense EVB MC33882 (0.8 Ω RDS(on)) Smart Six Output Switch with SPI and 8 L 1.0 375 3.0 10 SPI SPI Short Circuit, Current Limit, 30-pin HSOP Production Parallel Input Control Temp Sense 32-pin QFN (7 x 7) MC33996 16 Output Hardware Low-Side Switch with 24-Bit 16 L 0.5 450 1.0 to 2.5 50 SPI SPI Short Circuit, Current Limit, 32-pin SOICW Production Serial Input Control Temp Sense, Open Load EVB MC33999 16 Output Hardware Low-Side Switch with 24-Bit 16 L 0.5 450 1.0 to 2.5 50 SPI and SPI Short Circuit, Current Limit, 54-pin SOICW Production Serial Input Control and 8 Parallel Control Parallel Temp Sense, Open Load EVB 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–2 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — High-Side Switches (Solid State Intelligent Switches) Product Description No of High-Side Continuous Current RDS(on) (mΩ) Current Current Limitation Control1 Status/Fault Protection Features Packaging Status Outputs or Low-Side Each Output (A) of Each Output Limitation (A) Standby Max (µA) Reporting MC33580B Quad High Side Switch (15 mΩ), 4 H 10 15 100 5.0 SPI and SPI, Status Pin Overcurrent, Over Temperature, 24-pin PQFN Production with Protection and Diagnostics Parallel Short Circuit, Reverse Battery, Undervoltage Lock Out MC33874B Quad High Side Switch (35 mΩ), 4 H 5 35 55 5.0 SPI and SPI, Status Pin Overcurrent, Over Temperature, 24-Pin PQFN Production with Protection and Diagnostics Parallel Short Circuit, Reverse Battery, Undervoltage Lock Out MC33879 (1.0 Ω RDS(on)) Configurable Eight 8 H/L 0.35 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, Temp 32-pin SOICW Production Output SPI Controlled Switch 2 PWM Sense Exposed Pad MC33880 Configurable Eight Output SPI 8 H/L 0.5 550 1.2 25 SPI w/ SPI Short Circuit, Current Limit, Temp 32-pin SOICW Production Controlled Switch 2 PWM Sense EVB MC33888 Quad High-Side Switch and Octal 12 H/L 2 @ 10 A 2 x 10, 45/20 5.0 SPI SPI Short Circuit, Current Limit, Temp 36-pin PQFN Production Low-Side Switch 8 @ 500 mA 2 x 40, Sense, Current Recopy 2 @ 5.0 A 8 x 600 MC33981B Single High Side Switch (4.0 mΩ), 1 H 40.0 4 100 5.0 Parallel Status Pin, Overcurrent, Over Temperature, 16-pin PQFN Production with PWM, Protection and Current Monitor, Short Circuit, Undervoltage Lock Diagnostics Temperature Out MC33982B Self Protected 2 mΩ Switch with 1 H 60.0 2 100 or 150 5.0 SPI and SPI Temp Sense, Over/Undervoltage, 16-pin PQFN Production Diagnostic and Protection Selectable Parallel Shutdown, Overcurrent, Reverse EVB Polarity, Current Recopy MC33984B Self Protected 4 mΩ Switch with 2 H 30.0 4 100 or 75 5.0 SPI and SPI Temp Sense, Over/Undervoltage, 16-pin PQFN Production Diagnostic and Protection Selectable Parallel Shutdown, Overcurrent, Reverse EVB Polarity, Current Recopy MM908E621 See parameters on page 9 MM908E622 See parameters on page 9 MM908E624 See parameters on page 9 MM908E625 See parameters on page 9 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–3 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — H-Bridges and Motor Drivers Product Description Main Characteristics No of RDS(on) Peak Current Current Control1 Status Protection Features Packaging Status Outputs (mΩ) Limitation Limitation Reporting of Each (A) Standby Max Output MC33886 H-Bridge Driver (5.2 A) 225 mΩ @150°C 2 120 6.0 20 mA Parallel 1 Status Pin Short Circuit, Current Limit, Temp 20-pin HSOP Production (Overcurrent / Sense EVB Overtemp) MC33887 H-Bridge Driver with Sleep Mode (5.2 A) 130 mΩ @ 25°C, sleep 2 130 6.0 25 µA Parallel 1 Status Pin Short Circuit, Current Limit, Temp 20-pin HSOP Production mode, current sense (Overcurrent / Sense 54-pin EVB Overtemp) SOICW 36-pin PQFN MC33899 Programmable H-Bridge Power IC Designed to drive a DC 2 100 11.5 50 µA SPI and SPI Open Circuit detect, Undervoltage, 30-pin HSOP Production motor in both forward and Parallel Over Temperature Shutdown, 1Q2008 reverse shaft rotation under Output Short Protect, Short Circuit pulse-width modulation Current Limit (PWM) of speed and torque. MC33926 5.0A Throttle Control H-Bridge H-Bridge power IC for DC 2 120 8.0 50 µA Parallel Status Flag Output Short Circuit Protect, 32-pin PQFN Production servo motor control like Overcurrent Limit, Over 2Q2008 engine throttle control. Load Temperature can be PWM’ed up to 20 KHz MC34920 0.77 Ω max Dual 45 V H-Bridge DC/Stepper Dual 45 V H-Bridge Driver 8 2800 2.4 14 mA Serial I/F System Reset Overcurrent 44-pin PLCC Production Motors with Charge Pump and Dual Regulators, for DC/stepper motor with on Faults Undervoltage device can be paralleled in H-Bridge configuration charge pump and dual Overtemp regulators Shutdown MC34921 Integrated Motor Drive IC Dual PWM DC Motor Drive 4 700 2.5 30 mA Serial n/a Shoot Through Undervoltage 54-pin SOIC Production Detect 64-pin LQFP MC34923 Single 45 V H-Bridge with Charge Pump Single 45 V H-Bridge with 2 600 8.0 n/a Serial I/F Overcurrent Overcurrent 24-pin Production charge pump Undervoltage Undervoltage SOICW Overtemp Overtemp Reverse Reverse Battery Battery MC34929 Brushless DC 1.0 A, 28 V Motor Driver IC Three-Phase BLDC Motor 3 250 1.5 3.0 mA Parallel n/a Load Short Circuit Detect and 24-pin QFN Production Driver with Hall Sensor Protect, Over Temperature Detect inputs and Thermal Shutdown, Undervoltage Detect and Shutdown, Stalled Rotor Detect and Protect, Adj. Max. Current Limit MPC17C724 0.4A dual H-Bridge Motor Driver IC H-Bridge driver for bipolar 2 1000 0.80 1 µA Parallel - Shoot Through Protect, 16-pin QFN Production stepper motors and brush Undervoltage Detect EVB DC motors. Load can be PWM’ed up to 200 KHz, for speed/torque and current control. MPC17510 0.45 Ω H-Bridge Single 15 V H-Bridge with 2 450 3.0 1.0 mA Parallel Shutdown Shoot Through Undervoltage 24-pin Production charge pump Undervoltage Detect TSSOP MPC17511 0.46 Ω H-Bridge Single 6.8 V H-Bridge with 2 460 3.0 1.0 mA Parallel Shutdown Shoot Through Undervoltage 16-pin VMFP Production charge pump Undervoltage Detect MPC17529 0.7 Ω Dual 6.8 V with Charge Pump, 3.3 V Logic Dual 6.8 V with Charge 2 700 1.4 1.0 mA Parallel Shutdown Shoot Through Undervoltage 20-pin VMFP Production Pump Undervoltage Detect MPC17531 0.7 Ω Dual 6.8 V with Charge Pump and Sleep Dual 6.8 V with Charge 2 700 1.4 1.0 mA Parallel Shutdown Shoot Through Undervoltage 20-pin VMFP Production Mode Pump Undervoltage Detect 24-pin QFN MPC17533 0.7 Ω Dual 6.8 V External Charge Pump Dual 6.8 V external Charge 2 700 1.4 < 200 µA Parallel Shutdown Shoot Through Undervoltage 16-pin VMFP Production Pump Undervoltage Detect 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–4 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — H-Bridge Stepper Motors Product Description Main Characteristics Operating Packaging Status Voltage (V) MC33970 Dual Gauge Driver Large Pointer 4 Dual Output H-Bridge coil drivers, MMT-licensed two-phase stepper motor compatible, analog 6.2 to 26 24-pin SOICW Production microstepping (12-steps/deg of pointer movement) MC33976 Dual Gauge Driver with Configurable Response Time 4 Dual Output H-Bridge coil drivers, MMT-licensed two-phase stepper motor compatible, analog 6.2 to 26 24-pin SOICW Production microstepping (12-steps/deg of pointer movement) with unproved pointer movement MC33977 Single Gauge Driver Monolithic IC has 4 Output H-Bridge coil drivers and their associated control and management 6.2 to 26 24-pin SOICW Production logic, automatically controls speed, direction, and magnitude of current MC33991 Dual Gauge Driver Integrated Circuit 4 Dual Output H-Bridge coil drivers, MMT-licensed two-phase stepper motor compatible, analog 6.2 to 26 24-pin SOICW Production microstepping (12 steps/dep of pointer movement) MM908E626 Stepper Motor Control, Quad Half-Bridge with Embedded MCU and LIN for Voltage Regulator 5.0 V/60 mA, LIN Physical Layer with Selectable Slewrates 5 to 28 54-pin SOICW Production High Temperature TJ = 135°C Exposed Pad EVB (‘625) Power Actuation — Pre-Drivers (High-Side MOSFET Gate Drivers) Product Description Main Characteristics Operating Input Control1 Output Drives Status Protection Features Packaging Status Voltage (V) High/Low-Side, Reporting1 Drive Current MC33800 Engine Control Integrated Circuit capable of driving a Engine control IC, with six MOSFET 5 to 36 Parallel, SPI 6 H, 2mA (typ) SPI Open Load detect, 54-pin Production combination of six MOSFETs and ten Low Side loads. gate pre-drivers, eight Low Side Overcurrent protect, SOICW EVB Switches, and two constant current Overvoltage protect, low side switches Shorted Load detect, Undervoltage protect, Thermal protect MC33810 Engine Control Integrated Circuit capable of driving a Engine control IC with four MOSFET/ 4.5 to 36 Parallel, SPI 4 L, 780 µA (typ) SPI, Status Shorted Load detect, 32-pin Production combination of four MOSFETs or IGBT gates and four IGBT gate drivers and four low side Flags Thermal protect SOICW 1Q2008 Low Side loads. switches. Exposed Pad MC33927 Three-Phase Field Effect Transistor Pre-Driver for three- This IC contains three high-side FET 8 to 40 Parallel, SPI 3 H, 3 L, 1.0 A (typ) SPI Programmable Deadtime, 54-pin Production phase motor control pre-drivers and three low-side FET Reverse Charge Injection SOICW Nov. 2007 pre-drivers, with parallel and SPI Protect Exposed Pad EVB control. 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Power Actuation — Squib Drivers Product Description Main Characteristics Regulation Operating Packaging Status Voltage Voltage (V) MC33797 Four Channel Squib Driver IC Four-Channel High-Side and Low-Side 2.0 A FET Switches, Externally Adjustable FET 7.0 to 35 4.75 to 5.25 32-pin SOICW Production Current Limiting, Adjustable Current Limit Range: 0.8 A to 2.0 A, 8-Bit SPI for Diagnostics and FET Switch Activation, Diagnostics for High-Side Safing Sensor Status A change bar appears in the left margin to mark the location of new or revised information. SG1002–5 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Power Actuation — Powertrain Control and Engine Management Product Description Main Characteristics Peak Current RDSON Input Regulation Operating Packaging Status Limit (A) (mOhm) Control1 Voltage Voltage (V) MC33800 Engine Control Integrated Circuit capable of driving a Engine control IC, with six MOSFET gate pre-drivers, eight 2 @ 6.0 8 @ 700 SPI, - 5 to 36 54-pin SOICW Production combination of six MOSFETs and ten Low Side loads. Low Side Switches, and two constant current low side 6 @ 2.0 1 @ 250 Parallel EVB switches 1 @ 2.5 MC33810 Engine Control Integrated Circuit capable of driving a Engine control IC with four MOSFET/IGBT gate drivers and 6.0 100 SPI, - 4.5 to 36 32-pin SOICW Production combination of four MOSFETs or IGBT gates and four four low side switches. Parallel Exposed Pad 1Q2008 Low Side loads. MC33811 5 Input Solenoid Monitor IC 5 input solenoid monitoring to verify proper electrical and - - SPI - 10.5 to 15.5 16-pin SOICW Production mechanical solenoid operation. 1Q2008 MC33899 Programmable H-Bridge Power IC Designed to drive a DC motor in both forward and reverse 15.0 90 SPI, - 6 to 26.5 30-pin HSOP Production shaft rotation under pulse-width modulation (PWM) of Parallel 1Q2008 speed and torque. MC33926 5.0A Throttle Control H-Bridge H-Bridge power IC for DC servo motor control like engine 8.0 120 Parallel - 8 to 28 32-pin PQFN Production throttle control. Load can be PWM’ed up to 20 KHz 2Q2008 MC33927 Three-Phase Field Effect Transistor Pre-Driver for three- This IC contains three high-side FET pre-drivers and three - - SPI, - 8 to 40 54-pin SOICW Production phase motor control low-side FET pre-drivers, with parallel and SPI control. Parallel Exposed Pad Nov. 2007 EVB MC33975 22 input Multiple Switch Detect Interface with 32 mA 22 inputs contact monitoring (14 GND, 8 configurable), 4.0 - - SPI - 5.5 to 26.5 32-pin SOICW Production MC33975A Wetting Current and Wake-up mA or 32 mA pulse wetting current, low-power mode Exposed Pad interrupt capability, wakeup. 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Network Transceivers — CAN Physical Interface Components Product Description Main Characteristics Communication Operating Current Other Features Control and Protection Packaging Status Protocol Voltage Limitation Standby Status Features (V) (µA) Reporting1 Typ Max MC33742 System Basis Chip with Enhanced SBC, Dual VREG, Enhance HS CAN with CAN HS dual wire 5.5 to 27 60 150 Low power modes, remote and 4 MHz SPI Current and thermal 28-pin Production MC33742S High Speed CAN (250k to 1Mbps) Bus failure diagnostic capability, 4 wakeup local wakeup capabilities (for diag) protection for CAN SOICW EVB inputs, pin and function compatible with and regulator 48-pin QFN MC33989 MC33889B System Basis Chip Lite with Low- Dual VREG, LS CAN, 2 wakeup inputs CAN low-speed, 5.5 to 27 100 100 Dual voltage regulator, SPI 4 MHz Fault tolerant 28-pin Production MC33889D Speed CAN dual wires watchdog, wake input, sleep SOICW and stop modes MC33897C Single-Wire CAN Low or high (33.3 kbps or 83.3 kbps data SW CAN 6.0 to 27 45 60 Regulator Control Output 2 Mode Control Thermal shutdown, 14-pin SOICN Production MC33897D rates, wakeup capability (GMW3089 v2.3 Waveshaping Undervoltage Pins current limit 8-pin SOICN compatible) lockout detect and handle loss of GND MC33989 System Basis Chip with High-Speed SBC dual VREG, HS CAN, 4 wakeup CAN high-speed, 5.5 to 27 150 150 Dual voltage regulator, SPI 4 MHz n/a 20-pin HSOP Production CAN inputs dual wires watchdog, wake input, sleep 28-pin EVB mode, and cyclic sense SOICW 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–6 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Network Transceivers — LIN, ISO-9141, J-1850 Physical Interface Components Product Description Main Characteristics Communication Operating Current Other Control and Protection Packaging Status Protocol Voltage Limitation Standby Features Status Features (V) (µA) Reporting1 Typ Max MC33399 Local Interconnect Network (LIN) LIN: Local Interconnect Network Physical LIN single wire 7.0 to 27 20 50 Wakeup input pin, control of Parallel Current limitation, 8-pin SOICN Production Physical Layer Interface external voltage regulator Communication thermal protection EVB MC33661 eLIN – Enhanced LIN Physical Layer Selectable slew rate for operations at 10, LIN single wire 5.5 to 27 8.0 12 Compatibility with 5.0 V and Parallel Current limitation, 8-pin SOICN Production (Local Interconnect Network) 20, 100 kbps; bus short to ground fail 3.3 V micros, wakeup input Communication thermal protection EVB safe; excellent EMC behavior, pin and control of external regulator function compatible with MC33399 MC33689 System Basis Chip with Enhanced LIN Low power modes with remote and local LIN single wire 5.5 to 27 35 45 Dual HS switch (150 mA) 4 MHz SPI Current and 32-pin SOICW Production Physical Interface wakeup; 5.0 V/60 mA VREG with reset and single HS switch (for diag) thermal protection EVB and selectable W/D; enhanced LIN (50 mA) 2 wakeup inputs, for LIN, regulator physical layer (same as MC33661) sense amplifier, overvoltage and HS switches and undervoltage detection MC33689D 35 45 MC33910 2nd Generation System Basis Chip LIN 2.0 compatible, 5.0 v60mA LDO, 2 LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up 32-pin LQFP Production MC34910 with High Side Drivers high-side drivers w/PWM, 1 analog/digital Configurable Window 4 MHz sources, LDO Fault input Watchdog Detect, Low Voltage Reset MC33911 2nd Generation System Basis Chip LIN 2.0 compatible, 5.0 v60mA LDO, 1 LIN single wire 5.5 to 18 48 80 Configurable Window SPI Multiple wake-up 32-pin LQFP Production MC34911 with DC Motor Pre-driver high-side driver & 2 low-side drivers w/ Watchdog 4 MHz sources, LDO Fault PWM, 2 analog/digital inputs Detect, Low Voltage Reset MC33912 2nd Generation System Basis Chip LIN 2.0 compatible, 5.0 v60mA LDO, 2 LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up 32-pin LQFP Production MC34912 with DC Motor Pre-driver and Current high-side drives & 2 low-side drivers w/ Configurable Window 4 MHz sources, LDO Fault Sense PWM, 4 analog/digital inputs Watchdog, Current Sense Detect, Low Voltage Reset MC33990 Serial Link J-1850 Bus Transceiver J-1850 multiplexing bus with loss of J-1850 9.0 to 16 n/a 65 Internally reverse battery Parallel Current limitation, 8-pin SOICN Production ground protection protected Communication thermal protection Waveshaping 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. Network Transceivers — Distributed Systems Interface Components Product Description Main Characteristics System Type No of Current Limit Max Voltage Communication Packaging Status Channels (mA) (V) Protocol1 MC33780 Dual DBUS Master with Differential Drive and Master device for two differential DBUS buses. Interfaces the Distributed 2 400 26.5 SPI/DSI 16-pin Production Frequency Spreading buses to a standard SPI port. SOICW MC33793 Distributed System Interface (DSI) Share Interface 4-channel, 8-bit A-to-D converter, 5.0 V regulated output from Distributed 4 6.0 40 DSI 16-pin SOICN Production Sensor DSI bus, configurable I/O, fault tolerant, high drive output 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–7 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Signal Conditioning Product Description Main Characteristics Switch Monitor Operating Packaging Status Voltage (V) Voltage (V) MC33811 5 Input Solenoid Monitor IC 5 input solenoid monitoring to verify proper electrical and mechanical solenoid 0 to 64 10.5 to 15.5 16-pin SOICW Production operation. 1Q2008 MC33884 Switch Monitor Interface 12 input contact monitoring (6 GND, 2 VBAT, 4 configurable), 25 mA pulse wetting -14 to 40 7.0 to 26 24-pin SOICW Production current, master, slave, and low-power mode interrupt capability. MC33972 22 input Multiple Switch Detect Interface with 16 mA Wetting Multiple switch detection interface with suppressed wake-up designed to detect -14 to 38 5.5 to 26 32-pin SOICW Production MC33972A Current and Suppressed Wake-up closing and opening of up to 22 switch contacts (14 GND, 8 configurable), wetting -14 to 40 EVB current of 2.0 mA or 16 mA. MC33975 22 input Multiple Switch Detect Interface with 32 mA Wetting 22 inputs contact monitoring (14 GND, 8 configurable), 4.0 mA or 32 mA pulse -14 to 38 5.5 to 26.5 32-pin SOICW Production MC33975A Current and Wake-up wetting current, low-power mode interrupt capability, wakeup. -14 to 40 Exposed Pad MC33993 22 input Multiple Switch Detect Interface with 16 mA Wetting 22 inputs contact monitoring (14 GND, 8 configurable), pulse wetting current of 2.0 -14 to 40 5.5 to 26.5 32-pin SOICW Production Current and Wake-up mA or 16 mA, low-power mode interrupt capability, wakeup. EVB System Basis Chip Product Description Main Characteristics Bus Type Operating Current Other Features Diagnostics1 Protection Features Packaging Status and Standard Voltage Limitation Standby (V) (µA) Typ Max MC33689 System Basis Chip with Enhanced LIN Low power modes with remote and local LIN single wire 5.5 to 27 35 45 Dual HS switch (150 mA) SPI Current and thermal 32-pin Production MC33689D Physical Interface wakeup; 5.0 V/60 mA VREG with reset and and single HS switch (50 4 MHz protection for LIN, SOICW EVB selectable W/D; enhanced LIN physical mA) 2 wakeup inputs, regulator and HS layer (same as MC33661) sense amplifier, switches overvoltage and undervoltage detection MC33742 System Basis Chip with Enhanced High SBC, Dual VREG, Enhance HS CAN with CAN HS dual wire 5.5 to 27 60 150 Low power modes, remote SPI Current and thermal 28-pin Production MC33742S Speed CAN (250K to 1Mbps) Bus failure diagnostic capability, 4 wakeup and local wakeup 4 MHz protection for CAN SOICW EVB inputs; pin and function compatible with capabilities and regulator 48-pin QFN MC33989 MC33889B System Basis Chip with Low Speed Dual 5.0 V regulators LS CAN, CAN low-speed, 5.5 to 27 60 100 Dual voltage regulator, SPI Fault tolerant 28-pin Production Fault Tolerant CAN 2 wakeup inputs dual wires watchdog, wake input, 4 MHz SOICW EVB sleep and stop modes MC33910 2nd Generation System Basis Chip with LIN 2.0 compatible, 5.0 v60mA LDO, 2 LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up 32-pin LQFP Production MC34910 High Side Drivers high-side drivers w/PWM, 1 analog/digital Configurable Window 4 MHz sources, LDO Fault input Watchdog Detect, Low Voltage Reset MC33911 2nd Generation System Basis Chip with LIN 2.0 compatible, 5.0 v60mA LDO, 1 LIN single wire 5.5 to 18 48 80 Configurable Window SPI Multiple wake-up 32-pin LQFP Production MC34911 DC Motor Pre-driver high-side driver & 2 low-side drivers w/ Watchdog 4 MHz sources, LDO Fault PWM, 2 analog/digital inputs Detect, Low Voltage Reset MC33912 2nd Generation System Basis Chip with LIN 2.0 compatible, 5.0 v60mA LDO, 2 LIN single wire 5.5 to 18 48 80 Hall Sensor supply, SPI Multiple wake-up 32-pin LQFP Production MC34912 DC Motor Pre-driver and Current Sense high-side drives & 2 low-side drivers w/ Configurable Window 4 MHz sources, LDO Fault PWM, 4 analog/digital inputs Watchdog, Current Sense Detect, Low Voltage Reset MC33989 System Basis Chip with High Speed Dual 5.0 V regulators HS CAN, CAN high speed, 5.5 to 27 80 150 Dual voltage regulator, SPI Current limitation, 28-pin Production CAN 4 wakeup inputs dual wires watchdog, wake input, 4 MHz thermal SOICW EVB sleep and stop modes 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–8 SG1002Q42007
ANALOG AND MIXED SIGNAL PRODUCTS (continued) Embedded MCU + Power Product Description Main Characteristics Power Features MCU Reference MCU Detail Additional Information Packaging Status MM908E621 DC Motor/Mirror Control and LIN Mirror Voltage Regulator 5.0 V/60 mA, LIN 2 x 275 mΩ Half Bridges; MC68HC908EY16 HC08 Core, 16K Flash, 2/3 Pin Hall Sensor Input, 54-pin SOICW Production Control, Integrated Quad Half-Bridge Physical Layer with Selectable Slewrates, 2 x 750 mΩ Half Bridges; 512 Bytes RAM, ESCI, Analog Input with Current Exposed Pad Eval.1 and Triple High-Side with Embedded Window Watchdog, “Normal/Stop/Sleep 1 x 185 mΩ High Side; 8-Channel 10-bit ADC, 2x2 Source, 40 V Rated Wakeup MCU and LIN for High End Mirror Mode “Control 2 x 440 mΩ High Side; Channel, 16-bit Timer, Input, Vsup, Chip Temperature Switched 5.0 V Output (25 mA) Internal Clock Generator and Current Sensing MM908E622 DC Motor/Mirror Control and LIN Mirror Voltage Regulator 5.0 V/60 mA, LIN 2 x 275 mΩ Half Bridges; MC68HC908EY16 HC08 Core, 16K Flash, 2/3 Pin Hall Sensor Input, 54-pin SOICW Production Control, Integrated Quad Half-Bridge, Physical Layer with Selectable Slewrates, 2 x 750 mΩ Half Bridges; 512 Bytes RAM, ESCI, Analog Input with Exposed Pad Eval.1 Triple High-Side and EC Glass Driver Window Watchdog, “Normal/Stop/Sleep 1 x 185 mΩ High Side; 8-Channel 10-bit ADC, 2x2 Current Source, 40 V Rated with Embedded MCU and LIN for High Mode “Control 2 x 440 mΩ High Side; Channel, 16-bit Timer, Wakeup Input, Vsup, Chip End Mirror Switched 5.0 V Output (25 mA) Internal Clock Generator Temperature and Current EC Glass Driver Sensing MM908E624 DC Motor Control Using Relays (for Voltage Regulator 5.0 V/50 mA, LIN 1 x 7 Ω High Side, MC68HC908EY16 HC08 Core, 16K Flash, Operational Amplifier, 2 x 40 V 54-pin SOICW Production example, Window Lift, Sun Roof, and Physical Layer with Selectable Slewrates, 2 x 2.5 Ω High-Side Switches for 512 Bytes RAM, ESCI, Rated Wakeup Inputs EVB Power Seats), Triple High-Side Switch Window Watchdog with Selectable Timing, Relay Control 8-Channel 10-bit ADC, 2x2 with Embedded MCU + Power + LIN Normal/Stop/Sleep Mode Control Channel, 16-bit Timer, Internal Clock Generator MM908E625 Mirror Control, Stepper Motor Control, Voltage Regulator 5.0 V/60 mA, LIN 4 x 400 mΩ Half Bridges with MC68HC908EY16 HC08 Core, 16K Flash, 3 x 2 Pin Hall Sensor Inputs 54-pin SOICW Production Door Lock Quad Half-Bridge and Single Physical Layer with Selectable Slewrates, Current Control; 512 Bytes RAM, ESCI, with Cyclic Wakeup Feature, Exposed Pad EVB High-Side with Embedded MCU and LIN Timeout Watchdog with Periodic Wakeup 1 x 600 mΩ High Side; 8-Channel 10-bit ADC, 2x2 Analog Input with Current Feature, Normal/Stop Mode Control Switched 5.0 V Output (25 mA) Channel, 16-bit Timer, Source, Vsup, Chip Internal Clock Generator Temperature and Current Sensing MM908E626 Stepper Motor Control, Quad Half- Voltage Regulator 5.0 V/60 mA, LIN 4 x 400 mΩ Half Bridges with MC68HC908EY16 HC08 Core, 16K Flash, 512 Vsup, Chip Temperature and 54-pin SOICW Production Bridge with Embedded MCU and LIN for Physical Layer with Selectable Slewrates Current Control; Bytes RAM, ESCI, Current Sensing Exposed Pad EVB High Temperature TJ = 135°C Switched 5.0 V Output (24 mA) 8-Channel 10-bit ADC, 2x2 (use ‘625) Channel, 16-bit Timer, Internal Clock Generator 1. 1KIT908EINTFC board is available. A change bar appears in the left margin to mark the location of new or revised information. SG1002–9 SG1002Q42007
FREESCALE SEMICONDUCTOR POWER MANAGEMENT PRODUCTS The Power Management products portfolio provides solutions for Linear and Switching Benefits—Freescale Semiconductor SMARTMOS technology brings a wide range of voltage regulators. Hot Swap control and Power over Ethernet devices for use in benefits to today’s designs, including component reductions, power flexibility, durability, applications ranging from Consumer and Industrial to Automotive. efficiency, precision, high-performance analog, and robustness. SMARTMOS™—Freescale Semiconductor SMARTMOS technology allows Packaging - Freescale devices may be offered in EPP and RoHS compliant packages; view designers to interface high-precision components with the harsh automotive environment. the external web for specifics. Cost-Effective—Ideally suited for rugged automotive applications, SMARTMOS solutions For additional information, visit: offer a cost-effective blend of analog, digital, and robust power silicon that enables Documentation, Tool, and Product Libraries integrated, mixed-signal, power control ICs. www.freescale.com Functionality—SMARTMOS solutions implement traditional analog functions with smaller die www.freescale.com/analog size, and a modular process produces components with the minimum number of process www.freescale.com/powermanagement steps for each circuit, minimizing overhead. POWER MANAGEMENT Linear Regulators Product Description Main Characteristics Bus Type Operating Current Other Features Diagnostics1 Protection Features Packaging Status and Standard Voltage Limitation Standby (V) (µA) Typ Max MPC18730 1.15V/2.4V 2-CH DC to DC converters 2 Programmable DC-DC Converters, n/a 0.9 to 4.2 5.0 12 Pow Switches, Vout Set SPI n/a 64-pin QFN Production with 3 low dropout regulators 3 Programmable Low Drop Regulators, by Serial Input 4 MHz EVB Low Battery Operation 0.9V MC33689 System Basis Chip with Enhanced LIN Low power modes with remote and local LIN single wire 5.5 to 27 35 45 Dual HS switch (150 mA) SPI Current and thermal 32-pin Production MC33689D Physical Interface wakeup; 5.0 V/60 mA VREG with reset and and single HS switch 4 MHz protection for LIN, SOICW EVB selectable W/D; enhanced LIN physical (50 mA) 2 wakeup inputs, regulator and HS layer (same as MC33661) sense amplifier, switches overvoltage and undervoltage detection MC33730 Switch Mode Power Supply with Multiple Step-down Switching regulator (2.0A), with n/a 4.5 to 28 150 — Programmable voltage None Reverse Battery 32-pin Production Linear Regulators and Power 3 Programmable Linear Regulators (15mA, regulator, power Protect, SOICW-EP 2Q2008 Sequencing 15mA, 15mA) and 2 5.0V Sensor supplies sequencing, adjustable Undervoltage and (100mA, 100mA). OSC - Switcher Overvoltage Lockout, Reset monitor signals for regulators (4) MC33742 System Basis Chip with Enhanced High SBC, Dual VREG, Enhance HS CAN with CAN HS dual wire 5.5 to 27 60 150 Low power modes, remote SPI Current and thermal 28-pin Production MC33742S Speed CAN (250K to 1Mbps) Bus failure diagnostic capability, 4 wakeup and local wakeup 4 MHz protection for CAN SOICW EVB inputs; pin and function compatible with capabilities and regulator 48-pin QFN MC33989 MC33889B System Basis Chip with Low Speed Dual 5.0 V regulators LS CAN, CAN low-speed, 5.5 to 27 60 100 Dual voltage regulator, SPI Fault tolerant 28-pin Production Fault Tolerant CAN 2 wakeup inputs dual wires watchdog, wake input, 4 MHz SOICW EVB sleep and stop modes MC33989 System Basis Chip with High Speed Dual 5.0 V regulators HS CAN, CAN high speed, 5.5 to 27 80 150 Dual voltage regulator, SPI Current limitation, 28-pin Production CAN 4 wakeup inputs dual wires watchdog, wake input, 4 MHz thermal SOICW EVB sleep and stop modes 1. Products available with SPI Control work with the KITUSBSPIEVME and the KITUSBSPIDGLEVME USB-SPI Interface Boards. A change bar appears in the left margin to mark the location of new or revised information. SG1002–10 SG1002Q42007
POWER MANAGEMENT (continued) Switching Regulators Product Description Main Characteristics Operating Input Output Voltages Protection Packaging Status Voltage (V) Features MPC18730 1.15V/2.4V 2-CH DC to DC converters 2 Programmable DC-DC Converters, 0.9 to 4.2 DC-DC: 1.6 to 3.2V, 0.8 to 1.5V n/a 64-pin QFN Production with 3 low dropout regulators 3 Programmable Low Drop Regulators, Low Battery Operation 0.9V 3LDO: 2.8V Adj. down EVB MC33730 Switch Mode Power Supply with Multiple Step-down switching regulator (2.0A), with 3 Programmable Linear 4.5 to 28 4.9 to 5.1V, Reverse Battery Protect, 32-pin Production Linear Regulators and Power Regulators (15mA, 15mA, 15mA) and 2 x 5.0 V sensor supply 2.0 to 3.3V, Undervoltage and Overvoltage SOICW-EP 2Q2008 Sequencing (100mA, 100mA). 1.5 to 3.3V, Lockout, Reset monitor signals 1.0 to 5.0V, for regulators (4) 5.0V MC33998 2.6/5.0 Volt Switching Power Supply for Step-down switching regulator, 3.3 V linear regulator, 2.6 V standby 6.0 to 26.5 5.0 V @ 1400 mA Undervoltage shutdown, VDDH 24-pin Production Engine control regulator, 2 x 5.0 V sensor supply, power sequencing, and reset (40 transient) 2 x 5.0 V @ 200 mA current limit, VKAM current limit, SOICW 2.6 V @ 400 mA short circuit to GND, short 2.6 V @ 10 mA circuit to VPWR MC34701 Dual Output Power Supply Switching Step-down switching regulator with adjustable output voltage from 2.8 to 6.0 Adjustable Current limit, undervoltage 32-pin Production (1.5 A) 0.8 V to 5.0 V. Linear regulator with adjustable output voltage from shutdown, overvoltage detect, SOICW EVB 0.8 V to 5.0 V. Power sequencing, I2C bus interface, watchdog, over temperature shutdown (KIT33...) voltage margining, reset. MC34702 Dual Output Power Supply Switching Step-down switching regulator with adjustable output voltage from 2.8 to 6.0 Adjustable Current limit, undervoltage 32-pin Production (3.0 A) 0.8 V to 5.0 V. Linear regulator with adjustable output voltage from shutdown, overvoltage detect, SOICW EVB 0.8 V to 5.0 V. Power sequencing, I2C bus interface, watchdog, over temperature shutdown KIT33...) voltage margining, reset. MC34712 Single synchronous DDR Switch-Mode Synchronous buck switching regulator with adjustable output and an 3.0 to 6.0 0.7 to 1.35V Over Current limit, Short 24-pin QFN Production regulator (+/-3.0A) accuracy of +/-2% and a programmable switch frequency of 200 Circuit protect, Thermal EVB KHz to 1.0 MHz. shutdown, Output Overvoltage & Undervoltage detect MC34713 Single synchronous buck switching Synchronous buck switching regulator with adjustable output and an 3.0 to 6.0 0.7 to 3.6V Over current limit, Short Circuit 24-pin QFN Production regulator (5.0A) accuracy of +/-2% and a programmable switch frequency of 200 protect, Thermal shutdown, EVB KHz to 1.0 MHz. Output Overvoltage & Undervoltage detect MC34716 Dual synchronous DDR Switch-Mode Synchronous buck switching regulators with adjustable outputs and 3.0 to 6.0 0.7 to 3.6V, Over current limit, Short Circuit 26-pin QFN Production regulators (5.0A, +/-3.0A) an accuracy of +/-2% and a programmable switch frequency of 200 0.7 to 1.35V protect, Thermal shutdown, EVB KHz to 1.0 MHz. Output Overvoltage & Undervoltage detect MC34717 Dual synchronous buck switching Synchronous buck switching regulators with adjustable outputs and 3.0 to 6.0 0.7 to 3.6V, Over current limit, Short Circuit 32-pin QFN Production regulators (5.0A, 5.0A) an accuracy of +/-2% and a programmable switch frequency of 200 0.7 to 3.6V protect, Thermal shutdown, EVB KHz to 1.0 MHz. Output Overvoltage & Undervoltage detect Power over Ethernet (PoE) Product Description Main Characteristics Operating Input Max Current LImit Number of Protection Packaging Status Voltage (V) (A) Channels Features MC34670 IEEE 802.3af Powered Device with Integrated IEEE 802.3af Compliant Interface, Signature 30 to 60 2.1 1 Fast Short Circuit Detect, 20-pin SOICW Production Current Mode Switching Regulator Detection and Power Classification Functionality, High Thermal Shutdown, EVB Performance Current Mode Switching Regulator Overvoltage Shutdown, Inrush Current Limit, Overvoltage Lock Out A change bar appears in the left margin to mark the location of new or revised information. SG1002–11 SG1002Q42007
FREESCALE SEMICONDUCTOR ACCESS AND REMOTE CONTROL PRODUCTS For additional information, visit: Documentation, Tool, and Product Libraries Automotive Home Page www.freescale.com www.freescale.com/automotive Transmitters and Receivers Stand-Alone RF Products Product RF Type RF Frequency Protocols Clock Type Bandwidth Sensitivity Temperature Package Additional Features In Market Focus Supported Production MC33591/2/3/4 Receiver 315 MHz, 434 MHz or OOK and FSK Clock Generator 300 kHz or 105 dBm RF Sensitivity -40ºC to +85ºC 24 LQFP Date Manager, Internal or Existing Strobing Byte and Yes UHF RF Receiver, 868 MHz - 915 MHz Demodulation and Strobe OSC 500 kHz at 4.8 kbps Tone detection, Manchester Coded Data Clock recovery RF, Remote and up to 11 kbps. Fully configurable by SPI interface. Secure Entry MC33596 Receiver 315 MHz - 915 MHz OOK and FSK Programmable PLL 380 kHz -103 dBm to -81 dBm -40ºC to +85ºC 32 LQFP, RSSI (75 dB digital and 55 dB analog), Strobe OSC Yes UHF RF Receiver, Demodulation and Strobe OSC typ in 4 steps 32 QFN and Data Manager with clock recovery for Manchester RF, Remote and coded signals Secure Entry MC33696 Transceiver 315 MHz - 915 MHz OOK and FSK Programmable PLL 380 kHz -103 dBm to -81 dBm -40ºC to +85ºC 32 LQFP, RSSI (75 dB digital and 55 dB analog), Strobe OSC Yes Remote/Secure Demodulation and Strobe OSC typ in 4 steps 32 QFN and Data Manager Entry (2-way RF) MC33493 Transmitter 315 MHz, 434 MHz or OOK and FSK PLL with inte- — +5 dBm output power -40ºC to 14 TSSOP 11 kbps max data rate for Manchester code Yes Remote/Secure 868 MHz - 915 MHz Demodulation grated VCO +125ºC Entry (1-way RF) Tag Reader (STARC) for Immobilizer Applications Product Description Packaging Band Data Rate MCU Interface Operating Voltage Status MC33690 Stand-alone TAG reader with voltage regulator 20-pin SOIC 125 kHz 0.5 to 8 kbps K line (ISO-9141) 12 V Available Wireless RF System Solutions Product RF Type Flash RAM RF Protocols Clock ADC SPI Timer Package Additional Automotive Truck Tire Pressure Pressure Embedded Tire Accelerometer Market Focus Frequency Supported Type Features Pressure Pressure Range Sensor Rotation Localization Physical Self Range Range Accuracy* Speed Sensor Test MC68HC908RK2 — 2 KB 128 B — OOK and FSK ICG, 4-CH, — 2-CH, Timer 32QFP RF Transmitter, — — RKE, Remote/Secure Demodulation OSC 12-bit COP, LVI, POR, Entry KBI MC68HC908RF2 Transmitter 2 KB 128 B — OOK and FSK ICG, 4-CH, — 2-CH, Timer 32QFP RF Transmitter, — — TPMS Demodulation OSC 12-bit COP, LVI, POR, KBI MPXY80201 Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH, 1 2-CH, 16-bit SOIC PZT Motion — — TPMS (Motion KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Sensor Sensor-Based) Transmitter Width Modulator Package MPXY8300A Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH, 1 2-CH, 16-bit SOIC X-Y Yes 100-800 ±10kPa Yes Yes Yes TPMS KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Accelerometer kPa (Accelerometer- Transmitter Width Modulator Package Based) MPXY8300B Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH 1 2-CH, 16-bit SOIC X-Y Yes 100-800 ±10kPa Yes Yes TPMS KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Accelerometer kPa (Accelerometer- Transmitter Width Modulator Package Based) MPXY8300C Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH, 1 2-CH, 16-bit SOIC X-Y Yes 100-800 ±10kPa Yes TPMS KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Accelerometer kPa (Accelerometer- Transmitter Width Modulator Package Based) MPXY8320A Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH, 1 2-CH, 16-bit SOIC X-Y Yes 100- ±10kPa Yes Yes Yes TPMS KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Accelerometer 1500 kPa (Accelerometer- Transmitter Width Modulator Package Based) MPXY8320B Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH, 1 2-CH, 16-bit SOIC X-Y Yes 100- ±10kPa Yes Yes TPMS KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Accelerometer 1500 kPa (Accelerometer- Transmitter Width Modulator Package Based) MPXY8320C Transmitter 16 512 B 315MHz/ ASK and FSK OSC 8-CH, 1 2-CH, 16-bit SOIC X-Y Yes 100- ±10kPa Yes TPMS KB 434MHz RF Modulation 10-bit Timer/Pulse- Pressure Accelerometer 1500 kPa (Accelerometer- Transmitter Width Modulator Package Based) GPS Downconverter Product RF Freq (MHz) Supply Voltage Supply Current (Typ) Standby Current Conversion Gain Packaging System Documentation Range (Vdc) (mA) (mA) (typ) (dB) Applicability MRFIC1505A 1575.42 2.7 to 3.3 28 3 105 48-pin LQFP GPS MRFIC1505 (Case No 932) SG1002–12 SG1002Q42007
PRODUCT NUMBERING — ANALOG MCx tt xxx r v PPP RR PRODUCT CATEGORY TEMPERATURE RANGE CORE/TARGET REVISION VARIATION PACKAGING TAPE AND REEL MC - QUALIFIED STANDARD 33 = -40°C TO > +105°C - 125°C (default blank) (default blank) DESIGNATOR INDICATOR SC - CUSTOM DEVICE 34 = 0°C -40°C TO +70°C - 105°C PC - PROTOTYPE DEVICE xxZ - ENVIRONMENTAL PKG (Optional) (SOIC only) 34A = -40°C TO 105°C 34B = -40°C TO 85°C 34C = -40°C TO 70°C 35 = -55°C TO > +125°C MPC xxxxx r PPP RR PRODUCT CATEGORY CORE/TARGET REVISION PACKAGING TAPE AND REEL M - QUALIFIED STANDARD (default blank) DESIGNATOR INDICATOR S - CUSTOM DEVICE P - PROTOTYPE DEVICE PRODUCT NUMBERING — ANALOG EXTREME SWITCH MC rd XS g o xx r PPP RR PRODUCT CATEGORY RDSon FAMILY GENERATION # OF OUTPUTS XX ANALOG REVISION PACKAGING TAPE AND REEL MC - QUALIFIED STANDARD 10 = 10 Ohm XS = eXTREME SWITCH 3 = Gen 3 2 = DUAL CORE/TARGET (default blank) DESIGNATOR INDICATOR SC - CUSTOM DEVICE 15 = 15 Ohm 4 = QUAD PC - PROTOTYPE DEVICE 35 = 35 Ohm PRODUCT NUMBERING — ANALOG EMBEDDED MCU + POWER MM 9 08 F xxx r t PPP RR PRODUCT CATEGORY 9 = FLASH, OT CORE A = 1K Xxx ANALOG REVISION TEMPERATURE RANGE PACKAGING TAPE AND REEL MM - QUALIFIED STANDARD BLANK = ROM 08 = HC08 B = 2K CORE/TARGET (default blank) I = 0°C TO 85°C DESIGNATOR INDICATOR SM - CUSTOM STANDARD C = 4K C = -40°C TO 85°C PM - PROTOTYPE DEVICE D = 8K V = -40°C TO 105°C E = 16K M= -40°C TO 125°C SG1002–13 SG1002Q42007
NOTES SG1002–14 SG1002Q42007
NOTES SG1002–15 SG1002Q42007
How to Reach Us: Home Page: Asia/Pacific: Information in this document is provided solely to enable system and Freescale Semiconductor Hong Kong Ltd. software implementers to use Freescale Semiconductor products. There www.freescale.com Technical Information Center are no express or implied copyright licenses granted hereunder to design 2 Dai King Street or fabricate any integrated circuits or integrated circuits based on the Web Support: Tai Po Industrial Estate information in this document. Tai Po, N.T., Hong Kong http://www.freescale.com/support +800 2666 8080 support.asia@freescale.com Freescale Semiconductor reserves the right to make changes without USA/Europe or Locations Not Listed: further notice to any products herein. Freescale Semiconductor makes no Freescale Semiconductor, Inc. For Literature Requests Only: warranty, representation or guarantee regarding the suitability of its Technical Information Center, EL516 Freescale Semiconductor Literature Distribution Center products for any particular purpose, nor does Freescale Semiconductor 2100 East Elliot Road P.O. Box 5405 assume any liability arising out of the application or use of any product or Tempe, Arizona 85284 Denver, Colorado 80217 circuit, and specifically disclaims any and all liability, including without +1-800-521-6274 or +1-480-768-2130 1-800-441-2447 or 303-675-2140 limitation consequential or incidental damages. “Typical” parameters that www.freescale.com/support Fax: 303-675-2150 may be provided in Freescale Semiconductor data sheets and/or LDCForFreescaleSemiconductor@hibbertgroup.com specifications can and do vary in different applications and actual Europe, Middle East, and Africa: performance may vary over time. All operating parameters, including Freescale Halbleiter Deutschland GmbH “Typicals”, must be validated for each customer application by customer’s Technical Information Center technical experts. Freescale Semiconductor does not convey any license Schatzbogen 7 under its patent rights nor the rights of others. Freescale Semiconductor 81829 Muenchen, Germany products are not designed, intended, or authorized for use as components +44 1296 380 456 (English) in systems intended for surgical implant into the body, or other applications +46 8 52200080 (English) intended to support or sustain life, or for any other application in which the +49 89 92103 559 (German) failure of the Freescale Semiconductor product could create a situation +33 1 69 35 48 48 (French) where personal injury or death may occur. Should Buyer purchase or use www.freescale.com/support Freescale Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold Freescale Japan: Semiconductor and its officers, employees, subsidiaries, affiliates, and Freescale Semiconductor Japan Ltd. distributors harmless against all claims, costs, damages, and expenses, Headquarters and reasonable attorney fees arising out of, directly or indirectly, any claim ARCO Tower 15F of personal injury or death associated with such unintended or unauthorized 1-8-1, Shimo-Meguro, Meguro-ku, use, even if such claim alleges that Freescale Semiconductor was negligent Tokyo 153-0064 regarding the design or manufacture of the part. Japan 0120 191014 or +81 3 5437 9125 support.japan@freescale.com Freescale™ and the Freescale logo are trademarks of Freescale Semiconductor, Inc. All other product or service names are the property of their respective owners. © Freescale Semiconductor, Inc. 2007. All rights reserved. SG1002Q42007 Rev 0 10/2007